Exhaust Shop near Hburg

[Kaan]

2.5 inch cat back, no resonators, and a fart can. magical

[rherold9]

Why may I not use the oem gasket? I'm using the same piping. Is the gasket destroyed from unbolting the exhaust from the axle-back? (I haven't ever touched exhaust systems before) Here are diagrams:

[Kaan]

It will most likely not be salvageable ... We could always try and make you run to the parts store to see if it leaks.

[rherold9]

Yeah I guess that makes sense haha.

But, I just realized I'll need an extra 3-6 inches of 2.25" pipe to fit in between the muffler and tip to extend the tip to my bumper.... sigh. Anyone know of a good place to get some or have some extra in that small amount? If I can't find any I'll for sure have to go to the shop because I don't feel like buying 2 or 3 or 4 feet of it online lol..

[Kaan]

Advanced and autozone usually carry 1-2 foot pieces.

And we might be able to salvage some off the old set up

[rherold9]

Advanced and autozone usually carry 1-2 foot pieces.

And we might be able to salvage some off the old set up

Screw it let's do it. Remove the 2nd cat for a straight pipe and replace the muffler. I'll buy 2 feet and that should be enough. But Ill take a quick measure just in case. I'll order some by the end of the weekend probably. This is going to sound good once it is done :thumbup:

[Kaan]

Make sure it won't cause a code (in addition to making it louder)

[rherold9]

Make sure it won't cause a code (in addition to making it louder)

2nd cat isn't monitored on my car, thankfully only the first cat is.

I ordered the gasket + muffler/tip. Just need to order a reducer (because a larger diameter magnaflow muffler wouldn't fit on my car because it increased the length of the whole muffler) and extra pipe in at the end of the month once I get paid. And everything will be all set to make a meet.

[nismosam]

I'm in for spectating and drinking as well!

[Tyler.M]

I'll help consume beverages and drunkenly tell you how you're doing it wrong.

[rherold9]

Well as long as the person who knows how to weld isn't drunk... haha. I don't want this to happen:

[Kaan]

you dont want to do your own welding?

[NTIman]

Well as long as the person who knows how to weld isn't drunk... haha. I don't want this to happen:

you dont want to do your own welding?

:dunno:

Be warned: Kaan will hand you a sawzall and a welding helmet.

One of the last times I was there, Kaan handed someone a sawzall and said go to town on a bicycle seatpost.

[Kaan]

How else do you learn?

[Kaan]

lets get a head count going...
me
ryan
jason
rex
tyler
nismothingie (sorry i'm bad with names and i couldnt look you up)

its a bachelor weekend for me... so we'll be working and cooking! any food restrictions?

[Kaan]

Well as long as the person who knows how to weld isn't drunk... haha. I don't want this to happen:

tig in a jig vs. drunk flux core welding isnt even a fair comparison

[V1GiLaNtE]

Still the 9th?

I have some rear fenders that still need trimming..

[V1GiLaNtE]

:dunno:

Be warned: Kaan will hand you a sawzall and a welding helmet.

One of the last times I was there, Kaan handed someone a sawzall and said go to town on a bicycle seatpost.

The girlfriend is a quick learner.. I was oh so proud. :thumbup: Lets not forget the angle grinder to clean up those burrs.

[rherold9]

The 10th of November or the next weekend will work for me. My brother is coming down the 8th/9th so I'll be busy those days.

I'd like to do my own welding but uhhhh I'm kind of scared to ruin my stuff.

[Kaan]

Still the 9th?

I have some rear fenders that still need trimming..

SUNDAY NOV 10th... time is to be determined

I have to drop the boss off in gaithersburg that morning.