Pile of Subaru parts

[ScottyB]

shipping not included with any prices.  anything not installed on the car was kept in clean indoor storage.

BNIB ACT Streetlite 14lb Flywheel
Fits any impreza '06-'14, but may fit earlier subarus
Aluminum, still sealed up
https://www.oakos.com/ACT600480.htm">https://www.oakos.com/ACT600480.htm">https://www.oakos.com/ACT600480.htm
$235.00


BNIB Exedy OEM WRX Clutch Kit
Fits any impreza '06-'14, but may fit earlier subarus
comes with throwout bearing, pilot bearing and alignment tool.  boxes only opened to inspect parts.
https://www.oakos.com/EXEFJK1001.htm">https://www.oakos.com/EXEFJK1001.htm">https://www.oakos.com/EXEFJK1001.htm
$275.00




BNIB Assorted OEM Trans/Driveline parts
ask for prices or parts your want.  
these were in prep for a clutch replacement, some trans work to fix a leak and replace a known-to-wear bearing, and some updating to better OEM parts for increased reliability.
clockwise from top:
• axle roll pins
• clutch release lever
• clutch lever pivot ball
• input shaft needle bearing
• input shaft main bearing
• input shaft support bearing
• input shaft seal bearing
ignore the red bearing and throw out bearing, they belong with the clutch kit.



OEM WRX intake duct
fits any impreza from 2002 up to 2007
excellent upgrade for N/A RS.  logging showed a significant drop in intake temps at speed, up to 40 degrees in cooler weather.  also provided a true ram air effect at highway speeds.  plug and play fitment with the standard snorkel removed.  includes mounting screws and a home-made gasket that seals it to the fender opening.  never worry about hydrolock and keep your stock resonator so the engine runs properly at low rpm.
$15.00




Drawtite 24710 Sportframe Class 1 hitch not gonna ship this heavy beast.  pick up in Augusta GA or I can drop off in Roanoke VA this fall
1-1/4" receiver
should fit any Impreza/Foz chassis but please use P/N to confirm
comes with 5 of the required 6 mounting bolts - your chassis should have the bolts already screwed into the chassis though.  great for platform style bike racks, which is what i used this for.
NO rust, just red dust, thanks GA
https://www.etrailer.com/Trailer-Hitch/D...24710.html
$75.00

[ispoonwithmugen]

You have to keep those random axle pins in a backpack and one day a friend will need them and you'll conveniently pull them out :lol:

[ScottyB]

You have to keep those random axle pins in a backpack and one day a friend will need them and you'll conveniently pull them out :lol:

who does that?! oh wait, this guy, ha

sorry i couldn't have a nice running engine for sale in this thread, i'd send it to you cheap

[Senor_Taylor]

@jOEY

Let's put these all on with duct tape

[CaptainHenreh]

A flatbill monster hats? Colin McRae posters?

[Maengelito]

4 leftover oil filters: OEM "Blue" 15208AA12A, Purolator PureOne PL14460, and Wix Standard 57712
All work excellent on any 2.5L subaru and have the correct internal bypass pressure of 23psi.
includes 7 crush washers.
$15 for everything (a single Wix filter is over $8)

IIRC, my STi and Fozzy XT shared the same Purolator oil filter as my Miata so you MMM guys might be interested. Double check the part numbers though.

[ScottyB]

original post updated.

i may be up in Roanoke in 2 or 3 weeks for a day or two if anyone wants me to drop something off.

[RawrImAMonster]

Too bad you don't have a spare drive shaft.  I'm pretty sure my subaru has had a u-joint that is mildly bad since I've owned it.  It's not noticeable unless it's really loaded up and you're in 5th, but there is a little drivetrain vibration.  I just haven't fixed it because it's not bad enough to warrant spending 4-500 bucks on a re-manufactured driveshaft.

[ScottyB]

in case any new members with Subaru's are browsing this....everything's still for sale aside from the filters.

also have:
2 STi alternators

STi steering coupler (on the right) which you can see compared to the rubber-filled WRX one on the left is better for steering feel.


shoot me offers that aren't too horrendous

[ScottyB]

still have clutch/fly, trans bearings, and STi steering linkage if anyone needs/cares.

[JustinG]

Give you $1 to burn it all