I have no cordless tools.
Sent from my SM-G900R4 using Tapatalk
D_Eclipse9916 Wrote:Jake Wrote:DJ and I both use the lime green Ryobi stuff from Home Depot. No complaints yet.
All my stuff has never broken despite intense usage over 6 years. I did notice the "cheap small" batteries they come with are garbage NI-CD, but I have a lithium battery that has served me over 6 years and probably 200+ wheel changes.
If I was shopping now, I probably would go milwaukee (just for increased torque) and start that setup, but the Ryobi has served me perfectly.
I have the Ryobi too, no issues.
Now: 07 Porsche Cayman S | 18 VW Tiguan
Then: 18 VW GTI Autobahn | 95 BMW M3 | 15 VW GTI SE | 12 Kia Optima SX | 2009 VW GTI | 00 BMW 540i Sport | 90 Mazda Miata | 94 Yamaha FZR600R | 1993 Suzuki GS500E | 2003 BMW 325i | 95 Saab 900S
The dewalt cordless is 300 ft lbs and a 1/2" chuck..works pretty good. Not sure about the ryobi specs
2013 Cadillac ATS....¶▅c●▄███████||▅▅▅▅▅▅▅▅▅▅▅▅▅▅▅▅||█~ ::~ :~ :►
2008 Chevy Malibu LT....▄██ ▲ █ █ ██▅▄▃▂
1986 Monte Carlo SS. ...███▲▲ █ █ ███████
1999 F250 SuperDuty...███████████████████►
1971 Monte Carlo SC ...◥☼▲⊙▲⊙▲⊙▲⊙▲⊙▲⊙▲⊙☼◤
Sully Wrote:Should have jumped on that dewalt deal. I couldn't find it at my sears and I'm in th market for a new cordless drill. Would have been a good way to get the batteries and start the set
Sent from my SM-G930V using Tapatalk
One day price on the 18v combo for $199. Think that's the same I paid during a black friday sale years ago
<!-- m --><a class="postlink" href="http://www.lowes.com/pd/DEWALT-4-Tool-18-Volt-Nickel-Cadmium-NiCd-Cordless-Combo-Kit-with-Soft-Case/3044045">http://www.lowes.com/pd/DEWALT-4-Tool-1 ... se/3044045</a><!-- m -->
Haven't done as much research as I want to but I think I'm looking at the dewalt 20v max lithium stuff when I do pull the trigger. But I need to still research other brands
Sent from my SM-G930V using Tapatalk
2004 Honda S2000
2001 F-150 4X4 6" lift on 37" tires
2007 GSX-R 600
2008 SX-R 800
1992 (slammed by PO) 240sx Coupe (SOLD)
1999 BMW POS ///M3(SOLD)
1998 Honda Civic EX beater (SOLD)
Sully Wrote:Haven't done as much research as I want to but I think I'm looking at the dewalt 20v max lithium stuff when I do pull the trigger. But I need to still research other brands
Sent from my SM-G930V using Tapatalk you buy a router yet?
1987 Oldsmobile Cutlass 442
CaptainHenreh Wrote:Sully Wrote:Haven't done as much research as I want to but I think I'm looking at the dewalt 20v max lithium stuff when I do pull the trigger. But I need to still research other brands
Sent from my SM-G930V using Tapatalk you buy a router yet? Yea. A couple months ago. It's still in the box. Haven't set it up yet...
Sent from my SM-G930V using Tapatalk
2004 Honda S2000
2001 F-150 4X4 6" lift on 37" tires
2007 GSX-R 600
2008 SX-R 800
1992 (slammed by PO) 240sx Coupe (SOLD)
1999 BMW POS ///M3(SOLD)
1998 Honda Civic EX beater (SOLD)
CaptainHenreh Wrote:Sully Wrote:Haven't done as much research as I want to but I think I'm looking at the dewalt 20v max lithium stuff when I do pull the trigger. But I need to still research other brands
Sent from my SM-G930V using Tapatalk you buy a router yet? [FACE WITH TEARS OF JOY]
2019 Accord Sport 2.0 A/T
2012 Civic Si - Sold
Anyone find good deals on any li-ion stuff for black Friday? Particularly the dewalt max xr stuff.
Sent from my SM-G930V using Tapatalk
2004 Honda S2000
2001 F-150 4X4 6" lift on 37" tires
2007 GSX-R 600
2008 SX-R 800
1992 (slammed by PO) 240sx Coupe (SOLD)
1999 BMW POS ///M3(SOLD)
1998 Honda Civic EX beater (SOLD)
Amazon one-day deal on Dewalt Cordless Lithium-Ion 1/2 inch Compact Drill Driver Kit with 20V MAX XR Li-Ion Brushless 0.25" 3-Speed Impact Driver. Regularly $225, today $169.
<!-- m --><a class="postlink" href="https://www.amazon.com/dp/B074BYNVKM/ref=s9_acsd_bw_wf_a_dlp6ea86_cdl_2?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=center-1&pf_rd_r=MKQR8R3P6TR8Q8Y2HBN4&pf_rd_t=101&pf_rd_p=0&pf_rd_i=283155&tag=kinjadeals-20&ascsubtag=9c70b31030d593189c4208ccd150c75798c236d3&rawdata=%5Br%7Chttp%3A%2F%2Fjalopnik.com%2F%5Bt%7Clink%5Bp%7C1797390638%5Ba%7CB074BYNVKM%5Bau%7C5727177402741770316%5Bb%7Cdeals">https://www.amazon.com/dp/B074BYNVKM/re ... Bb%7Cdeals</a><!-- m -->
2019 Accord Sport 2.0 A/T
2012 Civic Si - Sold
That's the shitty drill though (well apparently all new dewalts have shitty off center chucks that wobble but I still bought one). The drill isn't brushless and there must be other differences cause I got the kit with the brushless drill for Christmas and it has a metal Chuck where that one is plastic
Sent from my SM-G930V using Tapatalk
2004 Honda S2000
2001 F-150 4X4 6" lift on 37" tires
2007 GSX-R 600
2008 SX-R 800
1992 (slammed by PO) 240sx Coupe (SOLD)
1999 BMW POS ///M3(SOLD)
1998 Honda Civic EX beater (SOLD)
Idk. I think I have that drill and it works fine for home improvement projects. I probably wouldn't use it if I worked with it every day, but it works fine for me. No issue with the chuck, but mine is definitely metal so maybe it's different?
2019 Accord Sport 2.0 A/T
2012 Civic Si - Sold
People still buy Dewalt?
2020 Ford Raptor
2009 Z06
1986.5 Porsche 928S
D_Eclipse9916 Wrote:People still buy Dewalt? My DeWalt 20v 1/2 inch Impact is fantastic. I've yet to use an electric impact that is better.
DEWALT DCF899P1 20V MAX XR Brushless High Torque 1/2" Impact Wrench Kit with Detent Anvil <!-- m --><a class="postlink" href="https://www.amazon.com/dp/B00X52TWA4/ref=cm_sw_r_cp_apa_RL1Fzb4JAREGF">https://www.amazon.com/dp/B00X52TWA4/re ... Fzb4JAREGF</a><!-- m -->
Sent from my Pixel using Tapatalk
I was looking into which brand to buy cause I wanted to start building a cordless tool set. Went with dewalt because we had an old 12v that is still kicking and works fine aside from the batteries not holding a charge but after all these years, can't really fault it. I guess everything is cheaper and shittier now but I figured I'd give it the benefit of the doubt.
Only other brand I'd look at would probably be Milwaukee but DeWalt seemed more available some how. Might just be my imagination. For corded, I went with Makita for circular and I'll probably go Bosch for nice jigsaw and maybe pick up a dewalt cordless.
Sent from my SM-G930V using Tapatalk
2004 Honda S2000
2001 F-150 4X4 6" lift on 37" tires
2007 GSX-R 600
2008 SX-R 800
1992 (slammed by PO) 240sx Coupe (SOLD)
1999 BMW POS ///M3(SOLD)
1998 Honda Civic EX beater (SOLD)
JPolen01 Wrote:Idk. I think I have that drill and it works fine for home improvement projects. I probably wouldn't use it if I worked with it every day, but it works fine for me. No issue with the chuck, but mine is definitely metal so maybe it's different? Like the part that holds the bit would be metal but the sleeve you twist looks plastic in the pic. Mine looks like textured metal. And it doesn't have the xr badge so it's not brushless so it's not as efficient as the impact. Sure it works just as well for homeowner stuff like you said though.
Sent from my SM-G930V using Tapatalk
2004 Honda S2000
2001 F-150 4X4 6" lift on 37" tires
2007 GSX-R 600
2008 SX-R 800
1992 (slammed by PO) 240sx Coupe (SOLD)
1999 BMW POS ///M3(SOLD)
1998 Honda Civic EX beater (SOLD)
I have a stack of Ryobi cordless tools. They all work, they're available at home depot, usually cheaper than online prices, 1/4 mile from my house. No complaints.
All of my heavy lifting tools are corded though, miter saw, sawzall, rotary hammer/drill, etc.
(09-25-2019, 03:18 PM)V1GiLaNtE Wrote: I think you need to see a mental health professional.
I've got the dewalt 20V drill, impact driver and sawzall, and I've been pretty happy with them. The drill is ok, the impact is awesome and the sawzall is great, but it doesn't run as long as I'd like on one battery. All my tools that do the really heavy work (drill press, bandsaw, tablesaw, ratchets and impact are either corded or air powered, but the portable battery powered stuff from dewalt is top notch. Using the drill and impact driver I built shelves that are 20' long by 12' high and didn't have to recharge any of the batteries. Overall, the dewalt tools have been a good buy.
2010 Dodge Ram 1500
2019 Ford Mustang
|