01-21-2008, 09:49 PM
Swaybars = Sex, im very happy with them, the car is much flatter. Although i prob wont be able to tell a big diff till i do an auto-x, im very very happy with this mod.
Come home to this beautiful sight
![[Image: P1030409%20001.JPG]](http://lh4.google.com/Jgallamore/R5VHOtNYWqI/AAAAAAAAAE4/qK-KDr_lHds/s800/P1030409%20001.JPG)
Remove front endlink, using a 14mm and a allen wrench
![[Image: P1030413%20005.JPG]](http://lh6.google.com/Jgallamore/R5VHPNNYWrI/AAAAAAAAAFA/NAYQSyjj7gE/s800/P1030413%20005.JPG)
Old sway/New sway
![[Image: P1030414%20006.JPG]](http://lh4.google.com/Jgallamore/R5VHPtNYWsI/AAAAAAAAAFI/YHvK89FafQk/s800/P1030414%20006.JPG)
![[Image: P1030415%20007.JPG]](http://lh5.google.com/Jgallamore/R5VHP9NYWtI/AAAAAAAAAFQ/Fe-HWOwG8C8/s800/P1030415%20007.JPG)
Drop Control arm to install new sway, factory one came out without having to drop it.
![[Image: P1030424%20016.JPG]](http://lh3.google.com/Jgallamore/R5VHQdNYWuI/AAAAAAAAAFY/j_3QNu_7kqQ/s800/P1030424%20016.JPG)
Horrible pic, New Poly bushing (red), factory bushing
![[Image: P1030425%20017.JPG]](http://lh3.google.com/Jgallamore/R5VIldNYWvI/AAAAAAAAAFk/6p_Gm__nj6k/s800/P1030425%20017.JPG)
The bastard that was the rear endlink, the place where you keep the stud from turning stripped, completely rounded, which is why i had to order a new one.
![[Image: P1030427%20019.JPG]](http://lh5.google.com/Jgallamore/R5VIl9NYWwI/AAAAAAAAAFs/GkaPrbFee_8/s800/P1030427%20019.JPG)
Rear sway old and new
![[Image: P1030431%20023.JPG]](http://lh6.google.com/Jgallamore/R5VImNNYWxI/AAAAAAAAAF0/3hLjJSUUohE/s800/P1030431%20023.JPG)
Rear sway installed
![[Image: P1030432%20024.JPG]](http://lh4.google.com/Jgallamore/R5VImtNYWyI/AAAAAAAAAF8/mneLtvTvWq4/s800/P1030432%20024.JPG)
Rear sway w/ new poly bushing
Come home to this beautiful sight
Remove front endlink, using a 14mm and a allen wrench
Old sway/New sway
Drop Control arm to install new sway, factory one came out without having to drop it.
Horrible pic, New Poly bushing (red), factory bushing
The bastard that was the rear endlink, the place where you keep the stud from turning stripped, completely rounded, which is why i had to order a new one.
Rear sway old and new
Rear sway installed
Rear sway w/ new poly bushing

