The following warnings occurred:
Warning [2] Undefined property: MyLanguage::$archive_pages - Line: 2 - File: printthread.php(287) : eval()'d code PHP 8.2.28 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/printthread.php(287) : eval()'d code 2 errorHandler->error_callback
/printthread.php 287 eval
/printthread.php 117 printthread_multipage



Madison Motorsports
Project 99 GSX AKA "MN3Y PIT" - Printable Version

+- Madison Motorsports (https://forum.mmsports.org)
+-- Forum: Technical (https://forum.mmsports.org/forumdisplay.php?fid=4)
+--- Forum: Member's Projects (https://forum.mmsports.org/forumdisplay.php?fid=12)
+--- Thread: Project 99 GSX AKA "MN3Y PIT" (/showthread.php?tid=5243)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Project 99 GSX AKA "MN3Y PIT" - JustinG - 01-03-2007

I thought I would post up one of these nifty project threads, mostly to help me keep up with what I have done, and also to allow everyone else if they are interested to keep up with what ive done to the GSX as well.

[Image: Eclipse028small.jpg]

First off my goals for the car as of right now,

Weekend AutoXer
Reliable


What was done to the car when I purchased it:

Exhaust:
Extreme 3" downpipe, 3" testpipe, Thermal R&D catback with neck down cut off.
Ported 2g exhaust manifold
Ported evo3 o2 housing

Turbo:
Ported Forced Performance evo316g

Fuel:
Walbro 255hp
FIC 650 injectors
Aeromotive AFPR

Intake:
geddy rs bov.
SBR/Kinetic FMIC short route SS piping
Dejon tool intake pipe
K&N air filter
EGR blockoff plate
1g throttlebody, with port matched intake manifold.

Electronics:
HKS EVC boost controller
Apexi SAFCII
Autometer boost
Autometer egt
Magnacor plug wires
Infinity speakers.
Optima red top battery.

Suspension & wheels:
Tokico Illumna struts with eibach prokit springs.
Yokohama avs es100 tires

Transmission:
act 2600 clutch with oem TOB
Redline Oil in transfercase, tranny, and rear diff.

Misc.:
20% tint

What Ive done to the car since purchase:

JVC Head unit
Removed Triple A pillar gauge pod, replaced with dual gauge bezel pod
Seat Leon Cupra R Front Lip
Polished Heat Shield
Polished Spark Plug Cover
Test Pipe replaced by Catalytic Converter
Viper Alarm
Front Liscense plate bracket
Legalized Tint Level 50% & 35%
Front Strut Tower Brace
Rear Strut Tower Brace
Homemade Grounding Kit
Custom 3in Catback with Magnaflow muffler (DJs old setup)
Aluminum Radiator
Samco Hoses
Slim Fans
ECMlink V3 lite
Winter Wheels: 16" Talon Swirlies w/ Kumho Ecsta ASX
Summer Wheels: 17x8 Rota Boosts, Tires Pending
PLX m300 Wideband
TSX HID retrofit

Mods for near future:

Seats
Harness
Coil Overs
Rollbar

Plans for the Distant Future:
Heavy AutoX possibly track time, once I can afford the repair bills and its no longer my DD. I dont wanna go to crazy with this car becuase I dont think I can go without being able to drive it on the street.

Comments:
I Absolutely love this car, HUGE improvement over the RS. Nothing but traction, loves boost, and gets descent gasmileage even using a SAFC to tune. My only complaints are the exhaust is incredibly loud on the interstate, hopefully tyhe catalytic converter will quiet it down, and the normal rattles that all Mitsubishi interiors have can be somewhat of a nuisance. I do general Maintenance, oil, plugs, filters, etc., and she drives all day with no problems, just as realiable as any car. *KNOCK ON WOOD*

[Image: IMG_8148_640x480.jpg]

Updated 4-27-10

- Feersty - 01-03-2007

Very concise Justin. Car looks good. I need to get a ride at some point. I rode in the RS, but definitely need to see what this thing can do.

- ScottyB - 01-03-2007

very nice indeed. even with all those mods i'm sure you're just scratching the surface.

- WRXtranceformed - 01-03-2007

I've always liked yours and DJs whips. Great writeup...and here's to a problem-free 2007 for you!

- HAULN-SS - 01-03-2007

You shoul dget that thing on a dyno and get a baseline with everything thats already been done

- Goodspeed - 01-03-2007

Congrats Justin, that car is a ton of fun...I can attest to how it gets up and goes, no muss no fuss the car is fast. I'll miss the tractor sound and dark tint though Sad Can't wait to see it again!

- JustinG - 01-03-2007

HAULN-SS Wrote:You shoul dget that thing on a dyno and get a baseline with everything thats already been done

I definately wanna get it on a dyno, only problem is finding an AWD dyno, hopefully the shop[ in staunton with the AWD dyno is legit, im gonna try and check it out when i get back in the burg.

- D_Eclipse9916 - 01-03-2007

Lets tune her up a little bit before that tho Justin. Im starting to tune mine and id like to see what the difference between a s-afc tune alongside a dsmlink w/ wideband and 3bar gm maf sensor does. Even though you have a more efficient turbo.

- Nis01 - 01-03-2007

Glad to see those stickers are going to good use. :thumbup: Nice work, can't wait to keep up with the build.

- JustinG - 01-03-2007

D_Eclipse9916 Wrote:Lets tune her up a little bit before that tho Justin. Im starting to tune mine and id like to see what the difference between a s-afc tune alongside a dsmlink w/ wideband and 3bar gm maf sensor does. Even though you have a more efficient turbo.

Well within the next month ill hopefully be able to purchase a wideband, then ill be able to tune the safc through a wideband. We shall see though. I wish i had never sold my wideband off the RS.

- Jewels - 01-03-2007

white97dsm Wrote:
HAULN-SS Wrote:You shoul dget that thing on a dyno and get a baseline with everything thats already been done

I definately wanna get it on a dyno, only problem is finding an AWD dyno, hopefully the shop[ in staunton with the AWD dyno is legit, im gonna try and check it out when i get back in the burg.

AR Fab in Winchester has an AWD dyno. And I just happen to know a guy who works there. I've known this guy since the second grade, so if you want I can get in touch with him, and see if they can work something out. I know they are legit too, cause they did a lot of work on that Corrado that runs in GTS with NASA.

- Nis01 - 01-03-2007

^^ Agreed. AR Fab is a great group of guys. Within the last year they have really been opening up to the AWD market. I know they just put down something to the tune of 625 on a project WRX of theirs. If you ever plan on going up there I'll definitely be willing to bring the Subie up for some dynoing as well.

- Feersty - 01-03-2007

white97dsm Wrote:
HAULN-SS Wrote:You shoul dget that thing on a dyno and get a baseline with everything thats already been done

I definately wanna get it on a dyno, only problem is finding an AWD dyno, hopefully the shop[ in staunton with the AWD dyno is legit, im gonna try and check it out when i get back in the burg.

Do you got one semester left, Justin?

- JustinG - 01-05-2007

After all that work....Cracked the valve cover, overtightened, although give me some respect i was being very very careful. New JDM TYTE VC should be here soon, same treatment will be given to it polished letters and black paint.

- JustinG - 01-16-2007

Well, i was researching some widebands and called for a price from horsepowerfreaks.com, i dealt with them during my RS build up. When i was doing the RS i ordered some injectors, they happened to be the wrong ones, so i sent them back. I assumed they credited the money back to my credit card, i paid off the credit card a couple years ago. Well when i called and got the price check they asked my information, low and behold they hadnt credited it back to my credit card they made it store credit. So i ordered the PLXM300, and only had to pay 6 bucks shipping. Technically i bought the whole thing but it was 2 years ago, so ill consider it a bargain at 6 bucks. Should be here tommorrow, then let the tuning begin.

Here is the wideband i purchased..... <!-- m --><a class="postlink" href="http://www.plxdevices.com/M-Series_productinfo.htm">http://www.plxdevices.com/M-Series_productinfo.htm</a><!-- m -->

Also the new VC is installed crack free thanks to DJ, i wasnt gonna touch the thing in fear of over torqueing and breaking it again.

- ScottyB - 01-16-2007

nice! heard many a good thing about the PLXM300.

- JustinG - 01-16-2007

yea i had it in the RS, i liked it. One of the better units out there for the price. No logging ability, but an update to the current pocketlogger software will be taking care of that.

- JustinG - 01-18-2007

wideband installed, A/F is lookin good, turned up the boost to 17.5 and had no instances of knock according to the safc and my a/f looked good, a little rich but still good. But my autometer gauge was reading 21 psi, either i got some nasty creep or the autometer gauge = poo

- D_Eclipse9916 - 01-18-2007

yay for 16g, boost creep!!!! We need bigger turbos and bigger wastegates...damnit, I said I wasnt going to spend any more money.

- Nis01 - 01-19-2007

Nice work Justin. I'm hoping its autometer gauge being crap and not boost creep. Glad to see you could turn the boost up a bit.