Tool Inventory
#1
Spurred by this thread: <!-- m --><a class="postlink" href="http://www.rr-ax.com/bbs/forums/thread-view.asp?tid=5138&posts=59&highlight=10mm&highlightmode=1#M115288">http://www.rr-ax.com/bbs/forums/thread- ... =1#M115288</a><!-- m -->, I took an inventory of my tools tonight. You should too...

What I'm missing:
1/4" 10mm 6-point
3/8" 8mm 6-point
3/8" 8mm deep socket
3/8" 10mm 6-point socket
3/8" 10mm 12-point socket
3/8" 10mm deep socket
3/8" 12mm 6-point
3/8" 12mm deep socket
3/8" 14mm 12-point socket

What I've broken and need to buy again:
3/8" Torque Wrench
Impact driver (x2)

What I've never had and realize I should (I'm sure some of the "missing" fit in this category):
3/8" 8mm deep socket
17mm box wrench

I also cleaned a lot of junk out of my track toolbox that I'll never need... Good 30 minutes spent.
I Am Mike
4 wheels:  '01 RAV4 (Formerly '93 Civic CX, '01 S2000, '10 GTI, '09 A4 Avant)
2 wheels: '12 Surly Cross-Check Custom | '14 Trek Madone 2.1 105 | '17 Norco Threshold SL Force 1 | '17 Norco Revolver 9.2 FS | '18 BMC Roadmachine 02 Two | '19 Norco Search XR Steel (Formerly '97 Honda VFR750F, '05 Giant TCR 2, '15 WeThePeople Atlas 24, '10 Scott Scale 29er XT, '11 Cervelo R3 Rival, '12 Ridley X-Fire Red)

No longer onyachin.
  Reply
#2
it's easier for me to list what I don't have...
  Reply
#3
white_2kgt Wrote:it's easier for me to list what I don't have...

that's what i did.
I Am Mike
4 wheels:  '01 RAV4 (Formerly '93 Civic CX, '01 S2000, '10 GTI, '09 A4 Avant)
2 wheels: '12 Surly Cross-Check Custom | '14 Trek Madone 2.1 105 | '17 Norco Threshold SL Force 1 | '17 Norco Revolver 9.2 FS | '18 BMC Roadmachine 02 Two | '19 Norco Search XR Steel (Formerly '97 Honda VFR750F, '05 Giant TCR 2, '15 WeThePeople Atlas 24, '10 Scott Scale 29er XT, '11 Cervelo R3 Rival, '12 Ridley X-Fire Red)

No longer onyachin.
  Reply
#4
I have jackstands a crappy walmart hydraulic lift and a cross lug wrench. That is about it. I use my dad's tools.
2017 Mineral White BMW M240i Cabriolet
2014 White Platinum Pearl Explorer Sport

Living in the Alamo City.
210
  Reply
#5
ok, i guess it wasn't clear. this is more about the items you've lost and can't live without OR the ones you've used so much that you've broken.
I Am Mike
4 wheels:  '01 RAV4 (Formerly '93 Civic CX, '01 S2000, '10 GTI, '09 A4 Avant)
2 wheels: '12 Surly Cross-Check Custom | '14 Trek Madone 2.1 105 | '17 Norco Threshold SL Force 1 | '17 Norco Revolver 9.2 FS | '18 BMC Roadmachine 02 Two | '19 Norco Search XR Steel (Formerly '97 Honda VFR750F, '05 Giant TCR 2, '15 WeThePeople Atlas 24, '10 Scott Scale 29er XT, '11 Cervelo R3 Rival, '12 Ridley X-Fire Red)

No longer onyachin.
  Reply
#6
I need a new hydraulic jack. The one I've got now leaks, and the handle is bent from when I tried to wrap it around a fence post. The Z made me do it.
My two feet.
  Reply
#7
I keep a little list in my wallet of the stuff I break/miss when working on things. That way when I find my way to sears I can replace it. I think all I'm missing now is a 6pt socket I broke with a hammer...
  Reply
#8
I was inspired last summer after getting Hansen socket trays for 1/4 thru 1/2 drive metric and english (damn mid 80's car). After the transfer I had a bunch of empty stands.

The garage floor is to sockets what a dryer is to socks.

What do you usually have in your track toolbox? Not necessarily specific tools, but generally what sort of repairs are you prepared for?
Current: 1985 LS1 Corvette | 2014 328i Wagon F31
Former: 2010 Ford Edge | 1999 Integra GS
I have a little bit of a rub near lock but if you are turned to lock on a track there are other problems already...
  Reply
#9
A honda can pretty much be entirely taken apart with an 8, 10, 12, 14, 17, 19, and however how big my axle socket is... That in mind, I'm prepared to do pretty much anything.

Extras that I bring are oil, tranny fluid, lubricants, jack, stands, and that's about it aside from the typical stuff.

The other benefit of running a Honda, is there is likely someone else there with whatever spares I may need and an auto parts store is usually close to wherever I'm going.

Knock on wood, but I've never had to do an emergency track repair or broken anything on my way to/from.
I Am Mike
4 wheels:  '01 RAV4 (Formerly '93 Civic CX, '01 S2000, '10 GTI, '09 A4 Avant)
2 wheels: '12 Surly Cross-Check Custom | '14 Trek Madone 2.1 105 | '17 Norco Threshold SL Force 1 | '17 Norco Revolver 9.2 FS | '18 BMC Roadmachine 02 Two | '19 Norco Search XR Steel (Formerly '97 Honda VFR750F, '05 Giant TCR 2, '15 WeThePeople Atlas 24, '10 Scott Scale 29er XT, '11 Cervelo R3 Rival, '12 Ridley X-Fire Red)

No longer onyachin.
  Reply
#10
All I'm missing is a pair of vice-grip pliers.

I don't generally use tools so they stay pretty close to where they belong. Wink
'76 911S | '14 328xi | '17 GTI | In memoriam: '08 848, '85 944

"Here, at last, is the cure for texting while driving. The millions of deaths which occur every year due to the iPhone’s ability to stream the Kim K/Ray-J video in 4G could all be avoided, every last one of them, if the government issued everyone a Seventies 911 and made sure they always left the house five minutes later than they’d wanted to. It would help if it could be made to rain as well. Full attention on the road. Guaranteed." -Jack Baruth
  Reply
#11
Mike Wrote:A honda can pretty much be entirely taken apart with an 8, 10, 12, 14, 17, 19, and however how big my axle socket is...

32mm
#99 - 2000 Civic Si (Future H2 Car, Former H1 car)
IPGparts.com, AutoFair Honda, Amsoil, QuikLatch Fasteners
NASA-MA Tech Inspector (Retired)
  Reply
#12
cant you fix anything with zip ties and duct tape?

thats all i ever need
78 Audi 80 / Fox
74 Audi Fox
75 diesel benz
03 jetta wagon TDI -DD
01 jeep Cherokee
84 rabbit GTI
98 Jetta TDI (motor swap)
92 Porsche C2

MM forums... where topics get OFF-TOPIC with a quickness
  Reply
#13
VW jesus lives!
1994 Ford Ranger
2004 Honda S2000
2007 BMW X3
  Reply
#14
$30 later, and my toolbox is prettier and more useful than it ever has been.

Still to get: more 3/8" plastic holders... the little strip thing didn't have enough for all my sockets. annnd i want to get some of those fancy mats to put in the drawers to keep shit from sliding around.
I Am Mike
4 wheels:  '01 RAV4 (Formerly '93 Civic CX, '01 S2000, '10 GTI, '09 A4 Avant)
2 wheels: '12 Surly Cross-Check Custom | '14 Trek Madone 2.1 105 | '17 Norco Threshold SL Force 1 | '17 Norco Revolver 9.2 FS | '18 BMC Roadmachine 02 Two | '19 Norco Search XR Steel (Formerly '97 Honda VFR750F, '05 Giant TCR 2, '15 WeThePeople Atlas 24, '10 Scott Scale 29er XT, '11 Cervelo R3 Rival, '12 Ridley X-Fire Red)

No longer onyachin.
  Reply
#15
this lil mats are awesome, however for all my sockets i got these for my craftsman roll away <!-- m --><a class="postlink" href="http://www.sears.com/shc/s/p_10153_12605_00965172000P?keyword=socket+organizer">http://www.sears.com/shc/s/p_10153_1260 ... +organizer</a><!-- m -->

With that, i know when a tool is missing, all labeled.
  Reply
#16
those organizers won't help me cause a) my toolbox isn't big enough and b) i only take like 1/3 of all my sockets with me. i keep the sizes i don't ever use and the standard shit in a giant box at home.
I Am Mike
4 wheels:  '01 RAV4 (Formerly '93 Civic CX, '01 S2000, '10 GTI, '09 A4 Avant)
2 wheels: '12 Surly Cross-Check Custom | '14 Trek Madone 2.1 105 | '17 Norco Threshold SL Force 1 | '17 Norco Revolver 9.2 FS | '18 BMC Roadmachine 02 Two | '19 Norco Search XR Steel (Formerly '97 Honda VFR750F, '05 Giant TCR 2, '15 WeThePeople Atlas 24, '10 Scott Scale 29er XT, '11 Cervelo R3 Rival, '12 Ridley X-Fire Red)

No longer onyachin.
  Reply
#17
Maengelito Wrote:VW jesus

Blair needs a new title
2010 Civic Si
2019 4Runner TRD Off-Road
--------------------------
Past:  03 Xterra SE 4x4  |  05 Impreza 2.5RS  |  99.5 A4 Quattro 1.8T  |  01 Accord EX  |  90 Maxima GXE  |  96 Explorer XLT
  Reply
#18
Mike Wrote:those organizers won't help me cause a) my toolbox isn't big enough and b) i only take like 1/3 of all my sockets with me. i keep the sizes i don't ever use and the standard shit in a giant box at home.

yea it woudl be worthless for a track box, but for your garage toolbox its a good thing IMO
  Reply
#19
white97dsm Wrote:
Mike Wrote:those organizers won't help me cause a) my toolbox isn't big enough and b) i only take like 1/3 of all my sockets with me. i keep the sizes i don't ever use and the standard shit in a giant box at home.

yea it woudl be worthless for a track box, but for your garage toolbox its a good thing IMO

i ain't got one of dose.
I Am Mike
4 wheels:  '01 RAV4 (Formerly '93 Civic CX, '01 S2000, '10 GTI, '09 A4 Avant)
2 wheels: '12 Surly Cross-Check Custom | '14 Trek Madone 2.1 105 | '17 Norco Threshold SL Force 1 | '17 Norco Revolver 9.2 FS | '18 BMC Roadmachine 02 Two | '19 Norco Search XR Steel (Formerly '97 Honda VFR750F, '05 Giant TCR 2, '15 WeThePeople Atlas 24, '10 Scott Scale 29er XT, '11 Cervelo R3 Rival, '12 Ridley X-Fire Red)

No longer onyachin.
  Reply
#20
white97dsm Wrote:this lil mats are awesome, however for all my sockets i got these for my craftsman roll away <!-- m --><a class="postlink" href="http://www.sears.com/shc/s/p_10153_12605_00965172000P?keyword=socket+organizer">http://www.sears.com/shc/s/p_10153_1260 ... +organizer</a><!-- m -->

With that, i know when a tool is missing, all labeled.

I HATE those things. I had them in my boxes and the sockets would fall over when I shut the drawers. Never again. I'm using this now,
<!-- m --><a class="postlink" href="http://www.sears.com/shc/s/p_10153_12605_00933933000P?keyword=socket+organizer">http://www.sears.com/shc/s/p_10153_1260 ... +organizer</a><!-- m -->

along with these in my roll around box,
<!-- m --><a class="postlink" href="http://www.sears.com/shc/s/p_10153_12605_00959373000P?vName=Tools&keyword=magnetic+socket">http://www.sears.com/shc/s/p_10153_1260 ... tic+socket</a><!-- m -->

Those trays BLOW.
  Reply


Forum Jump: