03-22-2018, 11:51 PM
(This post was last modified: 03-23-2018, 12:03 AM by dirtymikesfc.)
Hello all,
My name is Michael Mansour and I will be attending JMU this fall. I am a transfer student from NVCC and I love to hoon and make my car go faster. I drive an 88 Mazda RX-7 FC GTU. This was the lightweight RX-7 that came with no rear hatch wiper, roll up windows, and an overall lighter car coming in at a curb weight of 2650lbs. I bought the car 3 years ago completely stock. The car has the iconic 13B rotary engine.... which I blew after owning it for about 5k miles. I then swapped a jdm 13B turbo engine in and ran the car with turbo motor and trans with the stock ecu, diff, inj etc.. I then blew that motor leaning out while racing someone slower than me (of course). I then had my engine rebuilt by Angel Motorsports (who banged me). Through him I also got a set of 720cc Injector Dynamics Injectors as well as a standalone ECU (adaptronic) for my RX-7. The motor he built me blew after 6,000 miles, personally I believe the oil control rings failed but everyone has their own opinion . I then picked up a running 13B Bridgeport motor down in North Carolina. I put that motor in the car in early 2017 and it has gotten me almost 10k miles !!! I then blew the diff launching the car down my driveway and swapped in a Turbo differential that is good for around 500 wtq. I have done all my work in my garage at home. I do my own ECU tuning , and I am still on the stock turbo, my estimate on power would be mid to high 200's. Im a technical guy and I love my RX-7 and am looking forward to a kick ass season at JMU!
#ilovemywankel #rx7 #mazda #13b #fc #rotarylife
List of Mods:
23'' x 11'' front mount intercooler
Power Steering Delete
A/C Delete
Emissions Rack Delete
Airpump Delete
OMP Delete
4x ID 725cc Injectors
IAC/BAC Delete
Adaptronic Select S4 rx7 ECU
MAC 3 port boost solenoid
Poly Engine and trans mounts
DTSS rear steer eliminator Bushings
Drilled and slotted Rotors
New Calipers all around
Wideband O2
3 inch straight pipe
I got some vids on instagram @dirtymikesfc
old pic from when she was getting the frontmount
My name is Michael Mansour and I will be attending JMU this fall. I am a transfer student from NVCC and I love to hoon and make my car go faster. I drive an 88 Mazda RX-7 FC GTU. This was the lightweight RX-7 that came with no rear hatch wiper, roll up windows, and an overall lighter car coming in at a curb weight of 2650lbs. I bought the car 3 years ago completely stock. The car has the iconic 13B rotary engine.... which I blew after owning it for about 5k miles. I then swapped a jdm 13B turbo engine in and ran the car with turbo motor and trans with the stock ecu, diff, inj etc.. I then blew that motor leaning out while racing someone slower than me (of course). I then had my engine rebuilt by Angel Motorsports (who banged me). Through him I also got a set of 720cc Injector Dynamics Injectors as well as a standalone ECU (adaptronic) for my RX-7. The motor he built me blew after 6,000 miles, personally I believe the oil control rings failed but everyone has their own opinion . I then picked up a running 13B Bridgeport motor down in North Carolina. I put that motor in the car in early 2017 and it has gotten me almost 10k miles !!! I then blew the diff launching the car down my driveway and swapped in a Turbo differential that is good for around 500 wtq. I have done all my work in my garage at home. I do my own ECU tuning , and I am still on the stock turbo, my estimate on power would be mid to high 200's. Im a technical guy and I love my RX-7 and am looking forward to a kick ass season at JMU!
#ilovemywankel #rx7 #mazda #13b #fc #rotarylife
List of Mods:
23'' x 11'' front mount intercooler
Power Steering Delete
A/C Delete
Emissions Rack Delete
Airpump Delete
OMP Delete
4x ID 725cc Injectors
IAC/BAC Delete
Adaptronic Select S4 rx7 ECU
MAC 3 port boost solenoid
Poly Engine and trans mounts
DTSS rear steer eliminator Bushings
Drilled and slotted Rotors
New Calipers all around
Wideband O2
3 inch straight pipe
I got some vids on instagram @dirtymikesfc
old pic from when she was getting the frontmount