Project: Integra Type Dickbutt

[Kaan]

[rherold9]

Gif needs more dickbutt. Please someone fix this

[Kaan]

Some days I just wonder about people… like where was this BMW going?


One leg up

One leg up in the spin


Slightly off the ground



Straight up for my pride…

[ScottyB]

haha man that thing does love to lift a leg. looks good!

its crazy how tiny integras are starting to look now compared to modern cars....i don't remember them being that small....

[*insertusernamehere*]

Are you on stock suspension?

[Kaan]

Are you on stock suspension?

Have you read any of this thread?

Koni/GC, GC top hats on all 4 corners, 450 front spring, 550 rear springs, stock front sway bar and an ITR rear sway bar. The only stock stuff are front suspension bushings and sway bar

[*insertusernamehere*]

Not really lol. It just looks like your car sits really high. Couldn't tell.

[rherold9]

His car is light. It's going to sit higher with stiffer springs. Probably need shorter springs and/or dampers.

[Kaan]

It's 1.5-2 inches lower than stock.... I just don't ride on bump stops and have mad camberz

[Kaan]

double tap

[Kaan]

spare head, ARPs, timing belt, etc... i'll be tinning, ducting, changing a head gasket, and doing all sorts of crap. and quiklatching my bumpers to make trailer loading easier

[Kaan]

So the slope got very slippery… the HG and ducting turned into getting all the little things done while I’m there… #burnVISA



I’ve got two 4x4 sheets of aluminum to make ducting, ARP head studs, gates kevlar timing belt, OEM tensioner and HG… ghetto rigged torque mounts (Loctite poly filled stockers), new innovative steel motor mounts, a 240k mile short block, fresh-ish head (decked and ported, with dual valve springs and steel retainers), Walbro 255 fuel pump, RDX injectors, Rywire injector harness adaptors, Ktuned injector tops, new H2 legal Skunk2 manifold (will be port matching), maxbore LS throttle body (need to send it out), AEM 5 bolt adjustable cam gears, and H2 legal Crower Cams…. And some DIY intake mods coming. Yes, something is wrong with my head. Yes I’ll be sourcing a short block over the winter to really build (if the numbers/dyno graph comes out well)… or I’ll be swapping everything over to a B20.

I’m hoping I get some power… 150hp is legal for H2, I doubt I’ll get there… if I do I want to try to get it as early as I can… only hard work and about $600 on the dyno will tell.

Hopefully after all of this I can concentrate on getting this pig down to 2250lbs. Maybe the driver needs to diet too…

[*insertusernamehere*]

All of that work for 150horsepower? Why not just get a b20?

[Kaan]

All of that work for 150horsepower? Why not just get a b20?

because in HC... the B20s get to be 158/160hp and 50lbs heavier... B18Bs are capped at 150hp.... i purchased all the legal bolt ons for both B18Bs and B20s in HC2.... the winter project motor will be one or the other. either way i'm looking for big fat midrange and not so much peak.

[Jewels]

All of that work for 150horsepower? Why not just get a b20?

because in HC... the B20s get to be 158/160hp and 50lbs heavier... B18Bs are capped at 150hp.... i purchased all the legal bolt ons for both B18Bs and B20s in HC2.... the winter project motor will be one or the other. either way i'm looking for big fat midrange and not so much peak.

One day sweet Kaan, you are going to realize that Honda Challenge has died on the East Coast and you will give up trying to be competitive in it. You'll find a better use for that Honda Pile!

[Kaan]

Julie: I dont agree about the whole east coast... and i think it has the potential for a bright future.

All the haters: i'm following my dreams... at my time, pace, capability, and ability to afford it. For over a decade i've caught my fair share of grief, but i'm still at it, i'm still trying, and i'm still moving it forward even if its one inch at a time. I keep things positive with everyone, i'm still helpful to everyone, and i share every bit of knowledge i have to anyone that asks... even when i don't get it in return. I'm happy where i am and i'm happy where i'm hoping to go. No one motivates me but me (and my wife).

[navin]

One day sweet Kaan, you are going to realize that Honda Challenge has died on the East Coast and you will give up trying to be competitive in it. You'll find a better use for that Honda Pile!

:lol:

[Jewels]

Julie: I dont agree about the whole east coast... and i think it has the potential for a bright future.

All the haters: i'm following my dreams... at my time, pace, capability, and ability to afford it. For over a decade i've caught my fair share of grief, but i'm still at it, i'm still trying, and i'm still moving it forward even if its one inch at a time. I keep things positive with everyone, i'm still helpful to everyone, and i share every bit of knowledge i have to anyone that asks... even when i don't get it in return. I'm happy where i am and i'm happy where i'm hoping to go. No one motivates me but me (and my wife).

oohhh, I was just pickin'. You know I am the first person to say do what you want for yourself. If this is what you wanna do, then do it. Who cares what people on the internet think.

Don't be a fragile snowflake with me dude.

[rherold9]

So much fwd hate on the forums and from people in the club. I don't get it. Oh well. I guess I will never uderstand it. People have to always hate on something and everyone loves to on fwd.

Let the man do what he wants. I'll never understand why people tell someone to not build to what they want. "You should just do something else". "HC is dead". "Waste". If Kaan wants to run HC let him. Unless he is doing something stupid like I have though then say something. But he seems like he knows what he wants and his options. Also, I doubt he cares if HC is that competitive right now. He just wants to be back out there from what I know.

Who says others won't join in on HC in a few years?

Sent from my SM-G900V using Tapatalk

[Senor_Taylor]

If everyone says HC is dead, it will be. If just a few Kaans out there keep it alive, it can grow. Kick ass, Kaan.

Sent from my SM-G900R4 using Tapatalk