|
Get-the-supra-running-day
|
11-10-2004, 02:07 AM
woah Rex....did you stay at a holiday inn lately?
2010 Civic Si
2019 4Runner TRD Off-Road -------------------------- Past: 03 Xterra SE 4x4 | 05 Impreza 2.5RS | 99.5 A4 Quattro 1.8T | 01 Accord EX | 90 Maxima GXE | 96 Explorer XLT 
11-10-2004, 11:02 AM
ScottyB Wrote:woah Rex....did you stay at a holiday inn lately? Nah, I'm just an insufferable dork.
1987 Oldsmobile Cutlass 442
11-10-2004, 11:18 AM
My head a splode!
11-10-2004, 04:09 PM
If anyone wants to help!
Tonight! 11-10-2004! Unknown time, call me or Dave. (probably after 7) Tomorrow! 11-11-2004 --- 5PM! Start! We can grill food, if there's interest. Sunday! 11-14-2004 ----- 2pm! Ditto! Also, Dad's going to be honing the cyl. walls on both the KA and the GL engines, he'll probably do the GL tonight (metro 1.0L) and the KA some other time. (Nissan 2.4L) So if you've never seen that, here's your chance. 
1987 Oldsmobile Cutlass 442
11-10-2004, 04:15 PM
CaptainHenreh Wrote:Also, Dad's going to be honing the cyl. walls on both the KA and the GL engines, he'll probably do the GL tonight (metro 1.0L) and the KA some other time. (Nissan 2.4L) Can we bring other shortblocks for him to do? 
My two feet.
11-10-2004, 05:04 PM
Actually, if you've got one to do and want to bring it, I could probably get him to do it. It's an old-style stone-hone, if that matters. Why, you got a block you need honed?
1987 Oldsmobile Cutlass 442
11-15-2004, 01:38 AM
ERPDAYT!
Belts, covers, and other crap removed. The head is laid bare, the cams are ready to exit the head and be put in a bath. Left to do: Remove vaccum lines Remove sensors and shit Unbolt downpipe Remove head. Reverse.
1987 Oldsmobile Cutlass 442
11-15-2004, 08:22 AM
CaptainHenreh Wrote:Actually, if you've got one to do and want to bring it, I could probably get him to do it. It's an old-style stone-hone, if that matters. Why, you got a block you need honed? Nah, I was just joking.. At least for now :twisted:
11-15-2004, 08:31 AM
Rex, you going to have the head decked before you put it back on?
11-15-2004, 02:02 PM
.RJ Wrote:Rex, you going to have the head decked before you put it back on? I doubt it. Dave says he didnt' get it real hot, and I have no reason not to believe him. I'll check it with a straightedge and a feeler, and if it's out, I'll have it decked. If it's within tolerance...I just don't have the money. Anyway, the head should be off tonight if all goes as planned, and I'll know more. I might take some pictures, though I doubt many of you will ever see a 1JZ again, and so hardly give a shit.
1987 Oldsmobile Cutlass 442
11-15-2004, 02:32 PM
CaptainHenreh Wrote:I doubt many of you will ever see a 1JZ again, and so hardly give a shit. i will prob. never see one again which is why i'd love to see some pics! keep us updated homie
2010 Civic Si
2019 4Runner TRD Off-Road -------------------------- Past: 03 Xterra SE 4x4 | 05 Impreza 2.5RS | 99.5 A4 Quattro 1.8T | 01 Accord EX | 90 Maxima GXE | 96 Explorer XLT
11-15-2004, 03:45 PM
CaptainHenreh Wrote:I just don't have the money. Take it to Dale Engineering if needed, they're cheap
11-16-2004, 11:32 PM
.RJ Wrote:CaptainHenreh Wrote:I just don't have the money. Thanks, I'll keep that in mind. Considering how long I'm considering keeping the Supra in dry-dock, maybe I will just go ahead and get everything machined. Anyway, the head won't come off. All the bolts are out, nothing holding the head down but JDM Toyota Turbo Voodoo. Seriously, this isn't a joke. We used a slide hammer, we ran a metal pole through a chain and had dave and I do squat thrusts against the chain. We've rocked it back and forth, we slammed the intake manifold with a broomstick and a sledgehammer. We've rocked the head, we cranked with the bolts out hoping compression pressure would knock the head off. We put oil in the cylinders and hand-turned the engine hoping it would push the head off, or just freaking loosen the thing so we could take it off. No. Fucking. Dice. All of this trouble to break...nothing loose. We're sure there's a dowel in there someplace, maybe that hasn't been broken loose since it left the factory, and it's just being difficult. So we're thinking John Deere now. I really wanted to avoid that. I'm gonna try a rubber mallot first, slam it against the intake manifold, hoping to jar it loose. Then we'll have Green give it a shot.
1987 Oldsmobile Cutlass 442
11-17-2004, 12:08 AM
CaptainHenreh Wrote:Then we'll have Green give it a shot. you MUST get pics of that, or even video please. haha, better yet let us all know and we'll come on out!
1996 BMW 328is white │ 89 BMW 325i track car │84 BMW 325e for sale!│Past: 94 Honda Del Sol S, 2003 Toyota 4Runner V8 Limited, 1996 BMW 328i
e30/e36 parts for sale... PM me 
11-17-2004, 08:25 AM
You all should have seen the Green pull out the engine from Dave's black 240, it was cool as hell, cause nothing stops the Tractor when it sees a task to perform. But, I will make sure some pictures get taken even if I have to go to the Cave and take them myself.
2019 Impreza Sport
11-17-2004, 11:32 AM
CaptainHenreh Wrote:dave and I do squat thrusts Chris wants pics of the tractor, I want pics of this.
I Am Mike
4 wheels: '01 RAV4 (Formerly '93 Civic CX, '01 S2000, '10 GTI, '09 A4 Avant) 2 wheels: '12 Surly Cross-Check Custom | '14 Trek Madone 2.1 105 | '17 Norco Threshold SL Force 1 | '17 Norco Revolver 9.2 FS | '18 BMC Roadmachine 02 Two | '19 Norco Search XR Steel (Formerly '97 Honda VFR750F, '05 Giant TCR 2, '15 WeThePeople Atlas 24, '10 Scott Scale 29er XT, '11 Cervelo R3 Rival, '12 Ridley X-Fire Red) No longer onyachin.
11-17-2004, 11:48 AM
MichaelJComputer Wrote:CaptainHenreh Wrote:dave and I do squat thrusts Sounds like a Penthouse Letter. "So there I was, digging iron in one hand and chain in the other. Jumper cables were wrapped around my shoulder and there was motor oil and deisel fuel everywhere. I'd worked at her all day. I'd rocked her, I pulled at ever part she had, I smacked her, I stuck things every place I could think of and wiggled and she just wouldn't get off. So I decided I would have to go get the tractor..."
1987 Oldsmobile Cutlass 442
11-17-2004, 12:34 PM
.RJ Wrote:CaptainHenreh Wrote:I just don't have the money. I'll add to this. They are cheap, and very good. They'er a circle track shop, and those guys wind up their engines hard, so they have some great expereince. They did all my block work and assembly, and so far, I'm very impressed. One other note though, they are slow, and usually stay pretty backed up, so if you want something done, get it in there ASAP. They'er about 5 miles out 33 West, on the left. A pretty good jewel to be found in Harrisonburg.
http://www.85xr.com
1985 Merkur XR4Ti Track Car 2013 Ford F-150 FX4 Ecoboost E46 BMW 330Ci Sport 5spd 1973 Honda CL125S 1985 Honda CX500 2013 Arctic Cat 700 ATV 2017 Onewheel +
11-17-2004, 01:04 PM
CaptainHenreh Wrote:MichaelJComputer Wrote:CaptainHenreh Wrote:dave and I do squat thrusts haha thats awesome
1996 BMW 328is white │ 89 BMW 325i track car │84 BMW 325e for sale!│Past: 94 Honda Del Sol S, 2003 Toyota 4Runner V8 Limited, 1996 BMW 328i
e30/e36 parts for sale... PM me
11-17-2004, 02:22 PM
PDenbigh Wrote:I'll add to this. They are cheap, and very good. They'er a circle track shop, and those guys wind up their engines hard, so they have some great expereince. They did all my block work and assembly, and so far, I'm very impressed. When we say cheap...how cheap is cheap? And I'm in no real hurry. I have alot to do to the car before it's completely roadworthy. Frankly, looking at this harness I'm surprised the thing ran at all. So I want to go over the wiring harness, save up for my exhaust cutout, and maybe get some things powedercoated while I have it all off. As soon as I get the head off, I may send it to those guys, if the price is right. I know machine work isn't cheap. Also, since the block is Iron, does it really need to be done too?
1987 Oldsmobile Cutlass 442
|
