Local exhaust shop?

[ispoonwithmugen]

Okay, well i hated the hks hi power axleback on my car and already got pulled for it anyway. I just sold it and i have around 175ish to spend on a "custom" axleback... any suggestions for local shops/ prices all i need is the axleback, i still have the hks piping all the way back.

[fiveoh2go]

Take it to Bill's, they do a lot of import stuff.

Bill's Muffler - 1881 Virginia Avenue Harrisonburg - (540) 433-9407

[ispoonwithmugen]

alright, i'll shoot them a call, do you know anything on pricing, quality, etc?

[fiveoh2go]

do you know anything on pricing, quality, etc?

Nope, just that all the import guys go/have gone to him for years.

[ispoonwithmugen]

alright thanks man, i'll shoot him a call tomorrow and hopefully can get a quote etc

[Kaan]

$175 isnt going to get you far. not with quality parts. I think i have $175 in a muffler and resonator.

[JustinG]

$175 isnt going to get you far. not with quality parts. I think i have $175 in a muffler and resonator.

I've got 2 3in inlet/outlet mufflers.

1 is a round dynomax, straight through muffler. Came off my turbo RS, so slightly used.

The other is a center inlet/center outlet, polished stainless steel chambered muffler, summit racing brand. Brand new, was gonna use it on my GSX, but went another route.

If your interested, will let em go for pretty cheap.

Sent from my DROIDX using Tapatalk

[ispoonwithmugen]

all i need is a muffler, and some piping to connect it to the midpipe

[ispoonwithmugen]

$175 isnt going to get you far. not with quality parts. I think i have $175 in a muffler and resonator.

I've got 2 3in inlet/outlet mufflers.

1 is a round dynomax, straight through muffler. Came off my turbo RS, so slightly used.

The other is a center inlet/center outlet, polished stainless steel chambered muffler, summit racing brand. Brand new, was gonna use it on my GSX, but went another route.

If your interested, will let em go for pretty cheap.

Sent from my DROIDX using Tapatalk

are they good, and bolt up? i'm open, pm me a quote

[JustinG]

both are fine, and need to be welded on, since you are getting a axle back made, I figured you would be able to use one of them. I would recommend the chambered Summit muffler, would look nicer IMO, and shouldnt be obnoxiously loud.

Here is a link, <!-- m --><a class="postlink" href="http://www.summitracing.com/parts/SUM-630400/">http://www.summitracing.com/parts/SUM-630400/</a><!-- m -->

The Dynomax looks like this...
<!-- m --><a class="postlink" href="http://www.summitracing.com/parts/WLK-17223/">http://www.summitracing.com/parts/WLK-17223/</a><!-- m -->

PM sent in regards to pricing.

[ispoonwithmugen]

pm replied