|
Racecar prep 101
|
11-30-2005, 12:54 AM
Im sure you will keep us updated, but I (personally) cant wait to see you racing. You and Evan at one event will be awesome, especially for the more new members. Anyway, a question that has been on my mind...how do you expect to do in H4. Also, what do you plan on to compete later in life? Content with H4, or what?
2008 Mazda 3
11-30-2005, 08:37 AM
damnit458 Wrote:Anyway, a question that has been on my mind...how do you expect to do in H4. I built the car to win  damnit458 Wrote:Also, what do you plan on to compete later in life? Content with H4, or what? Who knows... I think world challenge or grand am cup would be pretty damn cool but I dont know where I'll end up down the line. If its just H4 and club racing, I'm ok with that though. 
11-30-2005, 08:49 AM
you may have built the car to win... but there is a little peice of metal still missing in your motor
 better start looking for new short blocks and an engine stand donkey!
#99 - 2000 Civic Si (Future H2 Car, Former H1 car)
IPGparts.com, AutoFair Honda, Amsoil, QuikLatch Fasteners NASA-MA Tech Inspector (Retired)
11-30-2005, 08:50 AM
I got the stand
11-30-2005, 08:52 AM
ok lets find you a nice block that needs lots of love... and get on it! lets really build the car to win!
#99 - 2000 Civic Si (Future H2 Car, Former H1 car)
IPGparts.com, AutoFair Honda, Amsoil, QuikLatch Fasteners NASA-MA Tech Inspector (Retired)
11-30-2005, 09:19 AM
Let me figure out how to drive it first
11-30-2005, 09:30 AM
will the motor last while you are learning
 with a little peice of metal running around in there? lol
#99 - 2000 Civic Si (Future H2 Car, Former H1 car)
IPGparts.com, AutoFair Honda, Amsoil, QuikLatch Fasteners NASA-MA Tech Inspector (Retired)
11-30-2005, 08:02 PM
Kaan Wrote:you may have built the car to win... but there is a little peice of metal still missing in your motor maybe its in the oil filter or the earl filter
1994 Ford Ranger
2004 Honda S2000 2007 BMW X3
11-30-2005, 08:05 PM
Kaan Wrote:will the motor last while you are learning I'm 90% sure its wedged harmlessly in an oil drain hole I'm not worried at all.
11-30-2005, 11:33 PM
what did you lose?
I Am Mike
4 wheels: '01 RAV4 (Formerly '93 Civic CX, '01 S2000, '10 GTI, '09 A4 Avant) 2 wheels: '12 Surly Cross-Check Custom | '14 Trek Madone 2.1 105 | '17 Norco Threshold SL Force 1 | '17 Norco Revolver 9.2 FS | '18 BMC Roadmachine 02 Two | '19 Norco Search XR Steel (Formerly '97 Honda VFR750F, '05 Giant TCR 2, '15 WeThePeople Atlas 24, '10 Scott Scale 29er XT, '11 Cervelo R3 Rival, '12 Ridley X-Fire Red) No longer onyachin.
11-30-2005, 11:41 PM
nothing at all. move right along, nothing to see here
12-01-2005, 12:17 AM
Mike Wrote:what did you lose? his passenger side floorboard
2010 Civic Si
2019 4Runner TRD Off-Road -------------------------- Past: 03 Xterra SE 4x4 | 05 Impreza 2.5RS | 99.5 A4 Quattro 1.8T | 01 Accord EX | 90 Maxima GXE | 96 Explorer XLT
12-01-2005, 12:30 AM
ScottyB Wrote:Mike Wrote:what did you lose? with that much nos he's lucky he didn't blow us all up
12-04-2005, 09:07 PM
Tow hook/loop installed. I need to cut a hole the bumper cover for the loops to fit through.
U-bolt from McMaster, $13 and Climbing Loop, $3 ![[Image: wMTE0NjkwMjZzNDEzZGZkMzF5NTQx.jpg]](http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTE0NjkwMjZzNDEzZGZkMzF5NTQx.jpg) Bumper support drilled ![[Image: wMTE0NjkwMzZzNDEzZGZkMzF5NTQx.jpg]](http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTE0NjkwMzZzNDEzZGZkMzF5NTQx.jpg) Bumper Foam trimmed - I think I am going to trim this some more. ![[Image: wMTE0NjkwNDZzNDEzZGZkMzF5NTQx.jpg]](http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTE0NjkwNDZzNDEzZGZkMzF5NTQx.jpg) ![[Image: wMTE0NjkwNTZzNDEzZGZkMzF5NTQx.jpg]](http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTE0NjkwNTZzNDEzZGZkMzF5NTQx.jpg)
12-04-2005, 09:34 PM
i didn't realize you could use a loop and not a tow hook, that's pretty cool.
:thumbup: for JMU colors too
2010 Civic Si
2019 4Runner TRD Off-Road -------------------------- Past: 03 Xterra SE 4x4 | 05 Impreza 2.5RS | 99.5 A4 Quattro 1.8T | 01 Accord EX | 90 Maxima GXE | 96 Explorer XLT
12-04-2005, 09:40 PM
wewt! Looks good.
When it comes to Ryan Jenkins, the story ends with me putting him in the wall.
2009 Speed Triple | 2006 DR-Z400SM | 1999 CBR600F4 | 1998 Jeep Cherokee -Ginger
12-04-2005, 09:50 PM
ScottyB Wrote:i didn't realize you could use a loop and not a tow hook, that's pretty cool. The loop is more better, wont impale my shins as I walk around the car, or a Spec Miata bumper when I punt them off the track in the carousel.
12-05-2005, 09:44 AM
How freaking getto RJ. Dude seriously how are you going to bump draft or punt people out of the way with that thing. C- in my book
Stop doing things on the cheap and get hinged system by Formula Systems Group.
12-05-2005, 09:45 AM
Littleton Wrote:Dude seriously how are you going to bump draft or punt people out of the way with that thing Thats why its a l00p, not a metal battering ram hook.
12-05-2005, 03:08 PM
how strong is your bumper supports in that direction? Not worried about ripping off the bumper? Mine's going on the frame not some bumper thats held in place by 2 bolts.
|
