also advertise it as "commissioned by rj."
I Am Mike
4 wheels: '01 RAV4 (Formerly '93 Civic CX, '01 S2000, '10 GTI, '09 A4 Avant)
2 wheels: '12 Surly Cross-Check Custom | '14 Trek Madone 2.1 105 | '17 Norco Threshold SL Force 1 | '17 Norco Revolver 9.2 FS | '18 BMC Roadmachine 02 Two | '19 Norco Search XR Steel (Formerly '97 Honda VFR750F, '05 Giant TCR 2, '15 WeThePeople Atlas 24, '10 Scott Scale 29er XT, '11 Cervelo R3 Rival, '12 Ridley X-Fire Red)
No longer onyachin.
Uhh, I want that driver side seat mount - whatcha want for it?
I know there is a lot of debate about mounting seats on sliders, but I have strong faith in double locking sliders like the Sparco ones in my car. Without them, short people (like me) can't drive your car. This might not be a big deal on a track car, but I can't live without my sliders. I'm pretty sure my driving position varies by event. Also, how am I going to show you how it's done when I need to sit on phone books?
Current:
- 1993 325is Black/Black 97 STX Christine
-2015 Ford Fiesta ST OW Ms Fiesty
Past:
-2002 Ford Ranger 4.0 XL 5MT AKA Goldy Locks
What are you using to mount your seat navin?
Buddy club rails/sliders for the passenger, shitty Bride ones for the driverside. I dunno, I personally don't mind sliders and really liked the way I sat in them...I wanted to buy the Piper setup off Mike, but we never came to an agreement/time that worked out to swap rails, etc.
Well id like to get enough to just cover a sparco base and side mounts. So your call.
That worked out nicely 
indeed, now if goodspeed would answer his text messages!!!!!
yay inbred mm love sex0rz!!! <3
I Am Mike
4 wheels: '01 RAV4 (Formerly '93 Civic CX, '01 S2000, '10 GTI, '09 A4 Avant)
2 wheels: '12 Surly Cross-Check Custom | '14 Trek Madone 2.1 105 | '17 Norco Threshold SL Force 1 | '17 Norco Revolver 9.2 FS | '18 BMC Roadmachine 02 Two | '19 Norco Search XR Steel (Formerly '97 Honda VFR750F, '05 Giant TCR 2, '15 WeThePeople Atlas 24, '10 Scott Scale 29er XT, '11 Cervelo R3 Rival, '12 Ridley X-Fire Red)
No longer onyachin.
With the new sway bar, use the old end links that came with it? or go with some BLOX adjustable end links???? hmmmmmmmmmm
The end links, front sway bar, and a Water Temp gauge should be the last things I want/need for a while!!!!!
use adjustables.
I Am Mike
4 wheels: '01 RAV4 (Formerly '93 Civic CX, '01 S2000, '10 GTI, '09 A4 Avant)
2 wheels: '12 Surly Cross-Check Custom | '14 Trek Madone 2.1 105 | '17 Norco Threshold SL Force 1 | '17 Norco Revolver 9.2 FS | '18 BMC Roadmachine 02 Two | '19 Norco Search XR Steel (Formerly '97 Honda VFR750F, '05 Giant TCR 2, '15 WeThePeople Atlas 24, '10 Scott Scale 29er XT, '11 Cervelo R3 Rival, '12 Ridley X-Fire Red)
No longer onyachin.
Looks like I need Front LCAs off an EX/SI or a 94-01 Integra to do the front sway bar. Will be ordering those soon, and picking up a Front GSR sway for $30 . Temp gauge is otw and just need to order front and rear end links. Then im putting my poor debit card away for a while, shes tired.
Have fun with the front sway bar install - its a PITA since you need to remove the shift linkage. I think people have done it without removing it, but I didn't see how  hrug:
If need be, I can mail you my shift linkage removal tool.
if you are talking about the tool to remove the pin... its the 5mm (white handle) HF allen tool. $4.99 and you get all the other allens. it worked for my CRX anyway... i just used it like a punch 
ghetto rig for lyf y0
#99 - 2000 Civic Si (Future H2 Car, Former H1 car)
IPGparts.com, AutoFair Honda, Amsoil, QuikLatch Fasteners
NASA-MA Tech Inspector (Retired)
No, you dont want to use the t-handle tool. You want a rolled pin punch (5mm), and buy two of them. This also comes in very handy when changing timing belt. Mcmaster will have these. You also need a 3-4 lb mini sledge.
(09-25-2019, 03:18 PM)V1GiLaNtE Wrote: I think you need to see a mental health professional.
Oh, trust me I love me some ghetto rigging. I used to use the airbox bolts on the EG to remove the "bitch" pin. But i use this now: <!-- m --><a class="postlink" href="http://www.amazon.com/gp/product/B000MVA7AA">http://www.amazon.com/gp/product/B000MVA7AA</a><!-- m -->
5 good hits, and its out.
damn, I was just at HF yesterday.....darn looks like ill have to make another trip!
On a side note, did you know that $35 will buy you a set of jack stands, 400 zipties, 8 microfiber towels, and a set of funnels? Cause it does, at HF
yes. we all have those things already
that shift linkage pin was fuckin' on there. i just dropped it at the shifter to get that trans in instead. good luck with that... feel free to mangle the pin... i sent about five extras with the car.
I Am Mike
4 wheels: '01 RAV4 (Formerly '93 Civic CX, '01 S2000, '10 GTI, '09 A4 Avant)
2 wheels: '12 Surly Cross-Check Custom | '14 Trek Madone 2.1 105 | '17 Norco Threshold SL Force 1 | '17 Norco Revolver 9.2 FS | '18 BMC Roadmachine 02 Two | '19 Norco Search XR Steel (Formerly '97 Honda VFR750F, '05 Giant TCR 2, '15 WeThePeople Atlas 24, '10 Scott Scale 29er XT, '11 Cervelo R3 Rival, '12 Ridley X-Fire Red)
No longer onyachin.
|
