Project: Integra Type Dickbutt

[.RJ]

if i can talk RJ into coming over, the trans should take no time at all.

buy this: <!-- m --><a class="postlink" href="http://www.amazon.com/Honda-Acura-Hammer-Shift-Tool/dp/B000I21KJA">http://www.amazon.com/Honda-Acura-Hamme ... B000I21KJA</a><!-- m -->

Most annoying part of dropping the trans IMO.. everything else is cake.

Buy a roll pin punch for $8 instead, or I have one or two

[Kaan]

while on my back removing the transmission in the freezing cold... i asked him if he had a 8mm punch... he said no. i warmed myself up and drove to sears to buy one. 5/16 was close enough and worked. now i have at least 2 punches that will work on that damn pin.

[D_Eclipse9916]

That's a hell of a hike for students.

We timed it with the DC auto show in the past, maybe we can time it with something else as well? It was just an idea to not make one person host it every time.

[Senor_Taylor]

That's a hell of a hike for students.

We timed it with the DC auto show in the past, maybe we can time it with something else as well? It was just an idea to not make one person host it every time.

Yeah, I understand. Just being devil's advocate. I know I can't really take a whole weekend off and it's hard to get current students out past an hour. It's like pulling teeth every year.

[rherold9]

So, ordered roll bar, looks like they do just-in-time manufacturing as they said 4-5 weeks until it gets here.... Didn't think it would take that long to make something they already have measurements on. I'm still down to help put the GSR trans in though.

[Kaan]

Things to do:
1. Swap Transmission/Flywheel
2. Front Pads/Brake Flush
3. Remove Rear Wiper (drop'n LBS)
4. Install Coolant Gauge/Pod
5. Livery... paint rimz/hood/vinyl/seal trunk

[SlimKlim]

So, ordered roll bar, looks like they do just-in-time manufacturing as they said 4-5 weeks until it gets here.... Didn't think it would take that long to make something they already have measurements on. I'm still down to help put the GSR trans in though.

Wait til you start buying furniture. We're heading into week six of waiting for our new couch. I get that there's gonna be some lead time since we chose our own fabrics and stuff but goddamn, how long does it take to nail together some 2x4s and stuff some cushions?

[D_Eclipse9916]

I hate myself.

In 2 weeks I will be racing a 2000lb 93 integra in chump car. See how the other half lives.... in FWD misery

[JPolen01]

Wait til you start buying furniture. We're heading into week six of waiting for our new couch. I get that there's gonna be some lead time since we chose our own fabrics and stuff but goddamn, how long does it take to nail together some 2x4s and stuff some cushions?

You ain't the only customer they have dawg.

[rherold9]

I hate myself.

In 2 weeks I will be racing a 2000lb 93 integra in chump car. See how the other half lives.... in FWD misery

Well as long as they have the suspension setup right it will be easy to throttle oversteer and can feel neutral. The best part is for me about 3/4ths of most turns you can be flat out. It feels weird but whatever.

Sent from my SM-G900V using Tapatalk

[Kaan]

I hate myself.

In 2 weeks I will be racing a 2000lb 93 integra in chump car. See how the other half lives.... in FWD misery

see the light!

[D_Eclipse9916]

I hate myself.

In 2 weeks I will be racing a 2000lb 93 integra in chump car. See how the other half lives.... in FWD misery

see the light!

A week after ill be racing a full aero, hoosiered 330rwhp 3000lb machine. Somehow I dont think ill be converted by FWD and street tires :lol:

Hopefully my new helmet with noise attenuation will help with the noise of this thing.
<!-- m --><a class="postlink" href="https://www.youtube.com/watch?v=IUXrTMmAM2o&feature=youtu.be">https://www.youtube.com/watch?v=IUXrTMm ... e=youtu.be</a><!-- m -->

[rherold9]

There will be a whole lot of noise but nothing really is going on.

Sent from my SM-G900V using Tapatalk

[Kaan]

they can add about 5-8hp with B18b cams out of a 94+ manual B18b... and they have the exact same markings. without a cam doctor and real knowledge no one would know.

[*insertusernamehere*]

I already want to dig out my ear drums lol

[Kaan]

two of these on the way to me

[Kaan]

seats will arrive by March 22nd... in theory

[rherold9]

seats will arrive by March 22nd... in theory

Probably be getting my roll bar around the same time

Sent from my SM-G900V using Tapatalk

[Kaan]

my seats are in NYC... so much excite.

[Kaan]

Sylvia is going to pick up the seats from the post office... #fatboyseats