The Cart Before the Horse: Spec 3 Build

[Senor_Taylor]

Alright, scheduled to get the cage done in April.

Basics:
1) 1.75 x 0.095 DOM tubing
2) 8-point cage (including foot protection)
3) Foot protection on both sides w/ foot rest for driver
4) Bent X doorbar on driver side w/ gusseting (get as close to the door as possible, or maybe even Nascar door bars for more room.
5) Straight X doorbar on passenger side w/ gusseting
6) Lower X bars in rear
7) Dashbar w/ tab for middle net restraint
8) Diagonal reinforcement across roof
9) Triangulation of main hoop and horizontal roof bar
10) Triangulation of A-pillar bar and horizontal windshield bar
11) New Windshield (if needed)
12) Install window net (Do I supply this or do you?)
13) Install eyebolts for 6-point belts on both sides
14) Install master kill switch (accessible to driver and from outside)
15) Jacking plates as described in Spec3 Rule 9.3.13.29
16) Weld in sunroof

How does that look? Basically copy pasted my requirements from another Spec3 guy.