Project SS!

[HAULN-SS]

Quick status update - springs came in! So I am officially in put back together mode. These are 550lb springs, should lower about 1+"


Got the driver's side in with no problems. I did mess up and forgot to put the bushing on the shock's extension rod for under the frame. Luckily dropping the shocks is like 2 bolts and a nut, so I can do that with everything else still on the car. Shocks are bilstein HD's, not sure if I mentioned that somewhere before. Should be a nice upgrade from the 20 year old sensatracks that were there before.


Got the spindle on, and the new moog swaybar endlink. Got a braided brake line that came with the C6 brake kit, and it's all in place now, just waiting on me to finish assembly. It seems to be pretty hard to find torque specs for most of this shit, so I'm kinda doing it by the feels. The UCA has those "vertical" adjustment bolts that are supposed to be set to 60 lbs, and I think the spindle to hub is like 120, but haven't found anything definitive. I will probably get the alignment shop to do a "nut and bolt check" on everything when I get it up there.