09-10-2014, 09:28 PM
Hello! My name is Chip Lowther, and I am a freshman here at JMU. Unfortunately, this means that I cannot bring my car, which I am missing a lot right now. I drive a 1995 Mustang Cobra Rio Red.
![[Image: HV023PL.jpg]](http://i.imgur.com/HV023PL.jpg)
Currently, it has 52,xxx miles on it, so it's just getting broken in. I bought the car in 2013 with only 38,6xx miles on it. Since then, I have done some upgrades to it, mostly to improve the noise. At first, I wanted to keep the car stock, but then the mod bug bit me. I originally had Flowmaster 40 series on the car, however, they were just a bit too quiet, so I swapped that for Magnaflow Magnapack catback exhaust kit. I then decided the 4 cats (yes you read that right 4 Catalytic converters stock) had to go, and bought a BBK catted x-pipe. My friends then convinced me to buy an off-road x-pipe (no cats), and I installed this one afternoon in my garage. Now, the car has the classic 5.0 rumble and screams at WOT. :thumbup:
I then decided to throw a Steeda Tri-ax short throw shifter on it, and paint the calipers red for the extra 5 hp (I wish).
![[Image: LvnlGGF.jpg]](http://i.imgur.com/LvnlGGF.jpg)
The last thing it has done to it is I have lowered it from the stock 4x4 height (rumor was it was that high for snow chains???).
Before:
![[Image: 4ihENMm.jpg]](http://i.imgur.com/4ihENMm.jpg)
After:
![[Image: g8VePU5.jpg?1]](http://i.imgur.com/g8VePU5.jpg?1)
![[Image: z8j6C9f.jpg]](http://i.imgur.com/z8j6C9f.jpg)
This was a much needed drop. I have some plans over winter for it, which include a new set of rear gears. I plan on going with 3.73s versus the stock 3.08 rear ratio. Also, before the school year is over, I want to get a dyno tune and a chip burned for the computer. Finally, around May, I plan to put some chrome Saleen wheels on it. That's the plan anyway :thumbup: . Thank you for reading this post, and see you around campus (or at events for the alumni
)!
![[Image: HV023PL.jpg]](http://i.imgur.com/HV023PL.jpg)
Currently, it has 52,xxx miles on it, so it's just getting broken in. I bought the car in 2013 with only 38,6xx miles on it. Since then, I have done some upgrades to it, mostly to improve the noise. At first, I wanted to keep the car stock, but then the mod bug bit me. I originally had Flowmaster 40 series on the car, however, they were just a bit too quiet, so I swapped that for Magnaflow Magnapack catback exhaust kit. I then decided the 4 cats (yes you read that right 4 Catalytic converters stock) had to go, and bought a BBK catted x-pipe. My friends then convinced me to buy an off-road x-pipe (no cats), and I installed this one afternoon in my garage. Now, the car has the classic 5.0 rumble and screams at WOT. :thumbup:
I then decided to throw a Steeda Tri-ax short throw shifter on it, and paint the calipers red for the extra 5 hp (I wish).
![[Image: LvnlGGF.jpg]](http://i.imgur.com/LvnlGGF.jpg)
The last thing it has done to it is I have lowered it from the stock 4x4 height (rumor was it was that high for snow chains???).
Before:
![[Image: 4ihENMm.jpg]](http://i.imgur.com/4ihENMm.jpg)
After:
![[Image: g8VePU5.jpg?1]](http://i.imgur.com/g8VePU5.jpg?1)
![[Image: z8j6C9f.jpg]](http://i.imgur.com/z8j6C9f.jpg)
This was a much needed drop. I have some plans over winter for it, which include a new set of rear gears. I plan on going with 3.73s versus the stock 3.08 rear ratio. Also, before the school year is over, I want to get a dyno tune and a chip burned for the computer. Finally, around May, I plan to put some chrome Saleen wheels on it. That's the plan anyway :thumbup: . Thank you for reading this post, and see you around campus (or at events for the alumni
)!
1995 Mustang Cobra- 1 of 717 Rio Red

![[Image: tumblr_lu419rDeQl1r0w390.jpg]](http://michiganjournal.org/wp-content/uploads/2013/03/tumblr_lu419rDeQl1r0w390.jpg)

![[Image: KoreanThisFuckingGuy.jpg]](http://www.asianjunkie.com/wp-content/uploads/2013/02/KoreanThisFuckingGuy.jpg)
hock: No BMW will be safe in 15 years.
