repair site?

[Chris]

Is there a good site for looking up specific honda repairs? I know I've seen Dave and Baggio with sites with step-by-step removal or installation instructions.

[Maengelito]

you could look for the helms manual in pdf form. i remember seeing a site awhile ago with a lot of honda/acura files in pdf format, but i cant remember which site it was...

[.RJ]

what do j00 need to know?

[Chris]

well if you remember on the way down to CMP my AC tensioner pulley and the outer bolts fell off. I bought a pulley a while back and have been trying different bolts to hold it on. They always are too tight and the thing squeals when i turn on the AC. So i ordered the honda parts- a large washer type part and a nut that both fit on the outer part of the pulley.

I put them on today and I either tighten it to where it won't spin or its too loose and works its way off. I have a diagram of the whole setup from the honda dealer but I still don't know what I'm doing wrong.

[.RJ]

<!-- w --><a class="postlink" href="http://www.hondaautomotiveparts.com">www.hondaautomotiveparts.com</a><!-- w -->

Order the correct hardware

[ScottyB]

when i turn on the AC.

pansy.






jk man, swamp ass is no fun

[Mike]

jk man, swamp ass is no fun

i beg to differ yeeeehawwww!

[Chris]

I have the right hardware, I got it from the dealer. The problem is figuring out how to tighten it so it can still spin.

yeah I usually don't use AC bc it takes away my power (haha yeah laugh it up), I just want it fixed.

[Dave]

well if you remember on the way down to CMP

"I locked them shits up!"

[Chris]

yes yes indeed I did...

that damn flat spot on my fronts was still there this past thurs when i rotated them. finally the vibration at 80-90 mph is gone!