+- Madison Motorsports (https://forum.mmsports.org)
+-- Forum: Technical (https://forum.mmsports.org/forumdisplay.php?fid=4)
+--- Forum: Technical Discussion (https://forum.mmsports.org/forumdisplay.php?fid=11)
+--- Thread: repair site? (/showthread.php?tid=544)
repair site? - Chris - 06-02-2004
Is there a good site for looking up specific honda repairs? I know I've seen Dave and Baggio with sites with step-by-step removal or installation instructions.
- Maengelito - 06-02-2004
you could look for the helms manual in pdf form. i remember seeing a site awhile ago with a lot of honda/acura files in pdf format, but i cant remember which site it was...
- .RJ - 06-02-2004
what do j00 need to know?
- Chris - 06-02-2004
well if you remember on the way down to CMP my AC tensioner pulley and the outer bolts fell off. I bought a pulley a while back and have been trying different bolts to hold it on. They always are too tight and the thing squeals when i turn on the AC. So i ordered the honda parts- a large washer type part and a nut that both fit on the outer part of the pulley.
I put them on today and I either tighten it to where it won't spin or its too loose and works its way off. I have a diagram of the whole setup from the honda dealer but I still don't know what I'm doing wrong.
- .RJ - 06-02-2004
<!-- w --><a class="postlink" href="http://www.hondaautomotiveparts.com">www.hondaautomotiveparts.com</a><!-- w -->
Order the correct hardware
- ScottyB - 06-02-2004
Chris Wrote:when i turn on the AC.
pansy.
jk man, swamp ass is no fun
- Mike - 06-02-2004
ScottyB Wrote:jk man, swamp ass is no fun
i beg to differ
yeeeehawwww!
- Chris - 06-02-2004
I have the right hardware, I got it from the dealer. The problem is figuring out how to tighten it so it can still spin.
yeah I usually don't use AC bc it takes away my power (haha yeah laugh it up), I just want it fixed.
- Dave - 06-03-2004
Chris Wrote:well if you remember on the way down to CMP
"I locked them shits up!"
- Chris - 06-03-2004
yes yes indeed I did...
that damn flat spot on my fronts was still there this past thurs when i rotated them. finally the vibration at 80-90 mph is gone!