2007 Mazdaspeed3

[droflow]

i have in my possession the fastest car in the world, or at least thats what everyone thinks of their own car.

the transformation of my car has been a tedious and expensive one. I've done quite a lot of mods to my car, and i personally still think it has a long way to go. A few months back, i kind of was set back in the build and had to remove and sell some parts. It used to be a lot faster but i unfortunately had to stock out.

i currently have a couple bolt ons on my mazdaspeed3
- Upgraded 3inch TMIntercooler
- Full intake system
- Corksport BPV
- Fuel Pump Upgrade
- e-cutout dump pipe
- Corksport Adjustable Sport Shocks and Struts
- Eibach Prokit Lowering Springs
- Cobb Accessport + tune
- More useless exhaust shit that makes loud noises
- A bunch of small useless nonperformance parts like shifter bushings and short throw doodads

*GOING IN*

--2.3 Disi Engine Rebuilt with forged internals--
Eagle Rods
Wiseco 88mm pistons
Block Bored .020 over
Rebuilt and machined cylinder head
Damond PCV plate
Ported Intake Manifold
Corksport injector seals
Damond EGR delete
3 inch downpipe
New FreekTune

*Eventually*
BNR S4 turbo OR GT3076

the beginning- day 1 of owning


I begin to fall ill to the 'Mod Bug'




i have become deeply sick with the mod bug have spent more than i should've




here are just some pretty photos of my "whip" as you rapscallions would say

[Senor_Taylor]

Bro, you didn't fuzz your license plates. Now the 5-0 is going to know what that blue speeding bullet was.

[rherold9]

Your Ge3kspeed banner adds 50hp

Sent from my SM-G900V using Tapatalk

[droflow]

Bro, you didn't fuzz your license plates. Now the 5-0 is going to know what that blue speeding bullet was.

AHHHHH You're so right!!!!!! i forgot to blur out the identification method that the cops use that is out in the wide open 24/7! i knew i shouldn't have been hitting 185mph on 81

[95SVTCobra]

Looks awesome man. I really dig those wheels, what brand are they (do I spy rota wheels?)? Also, what kind of cutout do you have on it (is it electric)? lol we all get bitten by the mod bug, I know it hit me hard. I was telling my buddy the other day, it all started with some mufflers, and at that point I knew, I was hooked :thumbup:

[JPolen01]

Those would be XXR wheels. 527 I want to say?

[Kaan]

well 'round here... non miata mazdas must rock Volks... :lol:

[rherold9]

well 'round here... non miata mazdas must rock Rays... :lol:

Ftfy

And get it right. They are for people who have shitbox econo cars

Sent from my SM-G900V using Tapatalk

[Jake]

I like the rimzz, they look good on it.

And that blue-ish color is the best color for 'em.

[CaptainHenreh]

And that blue-ish color is the best color for 'em.

The cosmic blue was Best Color for sure. I really do miss mine.

[droflow]

They are XXR 527's indeed. Volk's!? what college student has money for damn folks!!! thanks for the complements guys. Chip, its an electronic & wireless e-cutout with a remote that i had to have welded into my race pipe. forget the brand to be honest:/

[rherold9]

They are XXR 527's indeed. Volk's!? what college student has money for damn folks!!!

Sent from my SM-G900V using Tapatalk

[*insertusernamehere*]

They are XXR 527's indeed. Volk's!? what college student has money for damn folks!!!

hahaaaahahahahaha :lol: :lol: :lol:

[droflow]

So i haven't updated my build in a while but so far the only thing i have changed is the suspension. I got corksport (mazda specific brand) adjustable struts and eibach prokit lowering springs (about 1 inch drop all around). the ride has improved DRASTICALLY. i really want to autocross my car now that i have a better suspension and feel that my car is where i want it to be. new motor may be on the way within the next year..... forged internals 8) big turbo :wink: 26 psi :roll: watch out scott I'm coming (jokes) :lol:

but heres a update of what it looks like with the lowering springs and new struts installed. i love the reduction in gap in the rear. front could still use a little more low. but the back tire now only has about 3/4 of an inch of gap and no rub unless I'm going pretty dang fast over large bumps.

[rherold9]

Why not just BNR S4? Will be plenty of power for FWD and daily driver with less problems.

How are the corksport shocks/struts?

[droflow]

Why not just BNR S4? Will be plenty of power for FWD and daily driver with less problems.

How are the corksport shocks/struts?

BNR S4 is probably my #1 option as of right now, but to pass 400hp you need auxiliary fueling (meth or e85). So i considering all my options at this point.

Then corksport shocks/struts have been awesome so far! i can really feel the difference when i put them at 0 vs 15 clicks. Nose dive reduces tremendously when i have them set on 15. Corners feel much more planted when setup with a good suspension.

[droflow]

so i finally decided to build a new engine with forged rods and pistons for my speed3. the engine is finally complete! i just need to swap it in now. i took a tonnnn of photos along the way, and my Facebook has a whole album full so ill just link you guys to that. but here is my completed forged-internal engine! can't wait to get it running and start doing more modding after!!!

more photos: https://www.facebook.com/media/set/?set=...24186a2f61

[Senor_Taylor]

0-100 real quick. I guess I have to respect you now or something. Whatever.

Great way to ring in the beginning of your time as an officer! Hope it is back and running soon!

Sent from my SM-G900R4 using Tapatalk

[droflow]

0-100 real quick. I guess I have to respect you now or something. Whatever.

Great way to ring in the beginning of your time as an officer! Hope it is back and running soon!

Sent from my SM-G900R4 using Tapatalk

"respect you now, or something" LOL i guess so..... can't wait to get it swapped in!