+- Madison Motorsports (https://forum.mmsports.org)
+-- Forum: Technical (https://forum.mmsports.org/forumdisplay.php?fid=4)
+--- Forum: Appearance/Cosmetic (https://forum.mmsports.org/forumdisplay.php?fid=14)
+--- Thread: Carpet / Sound Deadening (/showthread.php?tid=3603)
Pages:
1
2
Carpet / Sound Deadening - JohnC - 01-30-2006
I'm finally replacing the carpet in the Lightning. It wasn't in *great* shape when I bought the truck. After 4 years of mud, dirt, sodas, motor oil, and the blood of countless slain migrant workers, I ripped it all out. I ordered new stuff from 1A Auto (which came highly recommended via the NLOC), so my real question is "What to do about sound deadening?"
I figure I might as well do *something* while the interior is apart - with all the exhaust, engine, and road noise, I can hardly hear myself think. Long trips are painful. I'm not trying to win any audio competitions, but right now I can't listen to anything much quieter than RATM. All of my Kenny G CDs are just going to waste
Dynamat is expensive, B-Quiet is cheaper (~ $240 for 100 ft^2), and FatMat is the cheapest (100 ft^2 for $99 on eBay). Have any of you guys used or would recommend anything in particular?
- white_2kgt - 01-30-2006
'round these parts we rip all that mess out, not put it back in, sorry, you are on your own, try one of the audio forums out there
- CaptainHenreh - 01-30-2006
Ask one of the MM Circuit City nerds.
- JohnC - 01-30-2006
CaptainHenreh Wrote:Ask one of the MM Circuit City nerds.
Figured they'd be in here like white on rice, but so far its just been you and the redneck...
- JohnC - 01-30-2006
white_2kgt Wrote:'round these parts we rip all that mess out, not put it back in, sorry, you are on your own, try one of the audio forums out there
Yup. If this were any other vehicle, I'd be doing the same thing. But on a 4500+ lb tow pig, I'll gladly trade a little weight for some peace and quiet
- Jeff - 01-30-2006
Well, I used some sound deadener from <!-- m --><a class="postlink" href="http://www.mcmaster.com/">http://www.mcmaster.com/</a><!-- m -->. You can get their products cheaper then e-bay junk and it works 100%. All you are doing is adding mass to the metal to absorb the vibrations and noise before it enters the cabin. MC-carr there has many possible solutions to your problem. "
Adhesive-Back Damping Sheets" were my choice. I paid 75 shipped I think.
- JohnC - 01-30-2006
TurboOmni08 Wrote:Well, I used some sound deadener from <!-- m --><a class="postlink" href="http://www.mcmaster.com/">http://www.mcmaster.com/</a><!-- m -->. You can get their products cheaper then e-bay junk and it works 100%. All you are doing is adding mass to the metal to absorb the vibrations and noise before it enters the cabin. MC-carr there has many posible solutions to your problem. Basic industrial deadener was my choice. I paid 75 shipped I think.
Got a link or something more specific? Navigating the McMaster-Carr website is a nightmare.
- Jeff - 01-30-2006
I just spent about 15mins looking and realized I gave u the wrong name. Adhesive-Back Damping Sheets. Longest URL evAR
- JohnC - 01-30-2006
TurboOmni08 Wrote:I just spent about 15mins looking and realized I gave u the wrong name. Adhesive-Back Damping Sheets.
Cool. More expensive than the eBay stuff though. What car did you use it on and how well do you feel it worked?
- Jeff - 01-30-2006
it is all over the Sebring. Works VERY well. Good quality stuff. Easy to apply (need a heat gun) and it stays put
- D_Eclipse9916 - 01-30-2006
Fatmat is good stuff. I dont know about thee other things. Definitely do fatmat other than dynamat...
- D_Eclipse9916 - 01-30-2006
JohnC Wrote:CaptainHenreh Wrote:Ask one of the MM Circuit City nerds.
Figured they'd be in here like white on rice, but so far its just been you and the redneck...
We also work and do school both so doesnt leave much time to get on the forums..
- JohnC - 01-30-2006
D_Eclipse9916 Wrote:JohnC Wrote:CaptainHenreh Wrote:Ask one of the MM Circuit City nerds.
Figured they'd be in here like white on rice, but so far its just been you and the redneck...
We also work and do school both so doesnt leave much time to get on the forums..
Weak. I demand instant answers from the MM forum!!!
- Jeff - 01-31-2006
GET MC CARR STUFF!!! Cheap, proven, good quality. There is your instant answer! Don't listen to the DJ fool...
- BLINGMW - 01-31-2006
can't you just round up all the bits of tar and crap that Chad, RJ, and Chris have removed from their cars recently and toss it in there? I'm sure they could be coaxed into selling :lol:
- D_Eclipse9916 - 01-31-2006
twenty coats of truck bed coating...I promise you thatll reduce your noise....muhahhah..
- Chris - 01-31-2006
BLINGMW Wrote:can't you just round up all the bits of tar and crap that Chad, RJ, and Chris have removed from their cars recently and toss it in there? I'm sure they could be coaxed into selling :lol:
damnit I just threw away a bag at the dump that was about 30 lbs.
- D_Eclipse9916 - 02-01-2006
dump scavenging!!
- JohnC - 02-08-2006
I ordered the FatMat. It was cheaper, and doesn't require a heat gun to install. Should be here on Friday - I'll put up some pics the the "Project Lightning" thread to detail my progress.
- Jeff - 02-08-2006
I think you will find if you don't use a heat gun it won't stick. There is almost no automotive adhesive that does not benifit from heat.