Looking for that guy... - Printable Version +- Madison Motorsports (https://forum.mmsports.org) +-- Forum: Madison Motorsports (https://forum.mmsports.org/forumdisplay.php?fid=3) +--- Forum: Lounge (https://forum.mmsports.org/forumdisplay.php?fid=6) +--- Thread: Looking for that guy... (/showthread.php?tid=3282)

Looking for that guy... - HAULN-SS - 12-06-2005 That was talking to me about some muffler shop in lynchburg...I cant remember his name, but, he's from madison heights/lynchburg area i think....if you are reading this, and you are that person, please say so....also...can you get in me in touch with the muffler shop guy? kthx. - Nick325is - 12-07-2005 Hey man. Do you remember the name of the muffler shop he told you? I live in lynchburg and can help you out if need be. The best shop in Madison Heights I can think of off hand is the Dodge Dealership actually...they do really good custom exhaust work. As far as in Lynchburg...Wayne's muffler shop is probably one of the better ones. What are you trying to get done? Nick - HAULN-SS - 12-07-2005 I have a bunch of crap, and I need someone to fab the tubing, and put it all on the car. I want to run collectors back from my headers, 2.5" pipe into a crosspipe behind the transmission, reduce that to 2.25" into my mufflers, over the rear axle, straight out the back in the stock location with some 24" stainless or chrome tips. The guy I talked to..i dont think he gave me the name of the shop, but he said he had the guy do some fab work, and it was really good and on the cheap too - Mike - 12-07-2005 24" tips? jeeeebus! - HAULN-SS - 12-07-2005 Yeah...gotta be long enough to run from under the bumper to behind the rear wheels...otherwise it looks gay, because you can see them from the side of the car, and it'd be some crappy aluminized pipe, then like 10" of bling - HAULN-SS - 12-07-2005 Awesome Not awesome...you can see the weld lines and crap...best pic i could find ;\ - Mike - 12-07-2005 i was just being a douche... questioning the 24" thing. in the honda world we measure exhausts by the size of the outlet. 24" is just silly. - Nick325is - 12-07-2005 If you talked to him at the meeting it was probably Hunter with the e39 5 series. He has a custom exhaust on his car an older guy bent up for him. I'll ask him about it. Nick - HAULN-SS - 12-07-2005 Brown haired guy, if that helps - HAULN-SS - 12-07-2005 oh..and tips are usually 3" round, or if I just get stainless pipe it'll be 2.5"..angle cut of course - Feersty - 12-07-2005 Hopefully this thread ends in someone being found. Should I send out an AMBER alert?