+- Madison Motorsports (https://forum.mmsports.org)
+-- Forum: Madison Motorsports (https://forum.mmsports.org/forumdisplay.php?fid=3)
+--- Forum: For Sale/Trade, WTB (https://forum.mmsports.org/forumdisplay.php?fid=9)
+--- Thread: FS- Mitsubishi TE04H Turbo (/showthread.php?tid=2026)
FS- Mitsubishi TE04H Turbo - Jeff - 04-06-2005
Factory Chrysler. It is small but would work on a lower displacement (1.6l-2.0l) very well. It is very quick spooling and would make for a good custom project. Oil and water cooled. Very little shaft play that I am sure is within spec. I will include the wastegate and actuator also. It is capable of 20psi. Used on many Honda turbo buildups.
This is a sample pic but it will be clean (not quite that clean though)
![[Image: chryTI_mitsi_lg.jpg]](http://turbosunleashed.com/shop/images/chryTI_mitsi_lg.jpg)
- ScottyB - 04-06-2005
i don't know much about mitsu turbos. is the bolt pattern similar to a T3?
- BLAIR - 04-06-2005
im a retard
- Mike - 04-06-2005
Yelloa3GTI Wrote:you sand blast it or something to get it that shinney.. hope no sand or anything got up in that if so.
reading > blair :twisted:
TurboOmni08 Wrote:This is a sample pic but it will be clean (not quite that clean though)
- Jeff - 04-06-2005
Scotty-
Let me compare, I thought it was a different flange but I am not positive.
- Jeff - 04-13-2005
This turbo has a T3 flange on it. It was modifed by Mitsu. to be used on the old style (Garrett) Chrysler manifold. It is likely the only Mitsu. Turbo with a t3 style flange. (any comment T?)
- Jeff - 04-28-2005
Bump for boost rot
- lillitnn92 - 04-28-2005
curious, how much?
i have my stock manifolds still, and i've seen one custom turbo kit work on a probe with the same 3.0L engine. he made it from scratch using stock manifolds. not that i would buy it right now, but i've contemplated fabbing up my own piping before. i have TIG welding experience :twisted: so it's always a possibility.
- Jeff - 04-28-2005
Well...boost needs to own you. $100?
- ViPER1313 - 04-28-2005
Boosted Vulcan = bad idea.
- lillitnn92 - 04-28-2005
TurboOmni08 Wrote:Well...boost needs to own you. $100?
you are correct sir!
but no money right now
if it's still around down the road (which for you, i hope not... $$$$$) i'll look you up.
- Jeff - 04-28-2005
Thanks bro, tell anyone u know who might want it.
- lillitnn92 - 04-28-2005
ViPER1313 Wrote:Boosted Vulcan = bad idea.
nope, we have about 8 supercharged ones on RPS now, running fine. one is putting down 220+ whp.
- ViPER1313 - 04-28-2005
Save up and do it right - <!-- m --><a class="postlink" href="http://www.kaufmannproducts.com/rangersw.htm">http://www.kaufmannproducts.com/rangersw.htm</a><!-- m -->
- lillitnn92 - 04-28-2005
ViPER1313 Wrote:Save up and do it right - <!-- m --><a class="postlink" href="http://www.kaufmannproducts.com/rangersw.htm">http://www.kaufmannproducts.com/rangersw.htm</a><!-- m -->
never!!!
i love V8's but i'll never follow every other ranger owner who aspires to do a V8 swap. i'll shove an SHO motor in before i do that, and that's been done before also
- ViPER1313 - 04-28-2005
lillitnn92 Wrote:never!!!
i love V8's but i'll never follow every other ranger owner who aspires to do a V8 swap. i'll shove an SHO motor in before i do that, and that's been done before also
Now there's an idea
- then you can be pushing 450whp with that turbo (just have to find a transmission that can handle that power, and if you find it PM me :twisted: )
- Jeff - 06-05-2005
I think I just sold this...guy offered me $150 once he gets his money back off of a broken one he got off of a junk yard. He said they are mailing him some paperwork and a box to send it back in. I would have taken like $75 for it but he offered
- .RJ - 06-06-2005
Did you get the supplement?
- Jeff - 06-07-2005
:?: