Ferrari F1 F430 Correctional
#1
Hey all,

Spent just under 15 hours on this F430 in Rosso Corsa- aim was a simple one-step correction with a target of around 65-75% correction- Client did not want to go all out- due to time constraints and the many other vehicles I will be working on for him soon.....it was a good choice.

Correctional work was done via my Flex DA and my PC- all on green Uber foam & correctional product was Sonax Perfect Finish- a newly developed product specifically developed for soft finishes- cuts very well and finishes down perfectly- so far it is embarrassing half of the Menzerna line which I carry! Thanks go again to Todd C. for the hookup.

Why I LOVE Perfect Finish- I achieved around 85-95% correction in just one step.

I first tried it on the Brilliant Black GT2RS I take care of and also more recently here on a black GTR- http://www.detailingbliss.com/forum/show...-shine.htm

Onto the befores:

Full decon wash performed with CG Citrus Wash and Clear/ Dawn mix

Motor was pretty clean however needed a thorough wipe down
[Image: DSC_0439.jpg]

Exhaust needed light attention
[Image: DSC_0440.jpg]

Sonax FE- the barrels needed it the most- agitated with SV wheel brush/ Uber Spoke brush
[Image: DSC_0442.jpg]
[Image: DSC_0445.jpg]
[Image: DSC_0447.jpg]

[Image: DSC_0448.jpg]
[Image: DSC_0449.jpg]
[Image: DSC_0452.jpg]

Dried, tons of micro marring and swirls- light improper machine use all over the car
[Image: DSC_0453.jpg]
[Image: DSC_0455.jpg]
[Image: DSC_0456.jpg]

Defects under the LED
[Image: DSC_0461.jpg]
[Image: DSC_0462.jpg]
[Image: DSC_0473.jpg]
[Image: DSC_0474.jpg]
[Image: DSC_0475.jpg]
[Image: DSC_0478.jpg]
[Image: DSC_0479.jpg]
[Image: DSC_0480.jpg]
[Image: DSC_0481.jpg]
[Image: DSC_0482.jpg]
[Image: DSC_0485.jpg]
[Image: DSC_0489.jpg]
[Image: DSC_0494.jpg]

After (One-step with Sonax Perfect Finish on green foam)
[Image: DSC_0495.jpg]
[Image: DSC_0496.jpg]
[Image: DSC_0497.jpg]
[Image: DSC_0498.jpg]
[Image: DSC_0499.jpg]
[Image: DSC_0635.jpg]
[Image: DSC_0639.jpg]
[Image: DSC_0642.jpg]
[Image: DSC_0643.jpg]

Before LSP
[Image: DSC_0464.jpg]
[Image: DSC_0465.jpg]
[Image: DSC_0466.jpg]
[Image: DSC_0468.jpg]
[Image: DSC_0470.jpg]
[Image: DSC_0471.jpg]
[Image: DSC_0476.jpg]

JetSeal 109 setting up
[Image: DSC_0504.jpg]

Layered around a half hour later with Petes 53 Black Pearl
[Image: DSC_0507.jpg]

The motor was wiped down and gone over a boars hair brush & ONR.

Calipers were also touched up with q-tips and ONR

The rear Diffuser was also wiped down with ONR and Dressed with 303 AP.

The interior was brushed with my SV brush/ wiped down with Megs APC 5:1

All seals were hit with 303, as were the wheel wells

Afters:
[Image: DSC_0509.jpg]
[Image: DSC_0511.jpg]
[Image: DSC_0513.jpg]
[Image: DSC_0517.jpg]
[Image: DSC_0519.jpg]
[Image: DSC_0520.jpg]
[Image: DSC_0521.jpg]
[Image: DSC_0524.jpg]
[Image: DSC_0525.jpg]
[Image: DSC_0527.jpg]
[Image: DSC_0533.jpg]
[Image: DSC_0535.jpg]
[Image: DSC_0537.jpg]
[Image: DSC_0538.jpg]
[Image: DSC_0539.jpg]
[Image: DSC_0540.jpg]
[Image: DSC_0530.jpg]
[Image: DSC_0541.jpg]
[Image: DSC_0542.jpg]
[Image: DSC_0544.jpg]
[Image: DSC_0548.jpg]
[Image: DSC_0549.jpg]
[Image: DSC_0550.jpg]
[Image: DSC_0551.jpg]
[Image: DSC_0553.jpg]
[Image: DSC_0555.jpg]
[Image: DSC_0557.jpg]
[Image: DSC_0559.jpg]
[Image: DSC_0563.jpg]
[Image: DSC_0568.jpg]
[Image: DSC_0569.jpg]
[Image: DSC_0575.jpg]
[Image: DSC_0576.jpg]
[Image: DSC_0577.jpg]
[Image: DSC_0578.jpg]
[Image: DSC_0580.jpg]
[Image: DSC_0582.jpg]
[Image: DSC_0583.jpg]
[Image: DSC_0584.jpg]
[Image: DSC_0586.jpg]
[Image: DSC_0588.jpg]
[Image: DSC_0590.jpg]
[Image: DSC_0592.jpg]
[Image: DSC_0593.jpg]
[Image: DSC_0594.jpg]
[Image: DSC_0596.jpg]
[Image: DSC_0597.jpg]
[Image: DSC_0598.jpg]
[Image: DSC_0600.jpg]
[Image: DSC_0601.jpg]
[Image: DSC_0602.jpg]
[Image: DSC_0604.jpg]
[Image: DSC_0607.jpg]
[Image: DSC_0609.jpg]
[Image: DSC_0610.jpg]
[Image: DSC_0613.jpg]
[Image: DSC_0614.jpg]
[Image: DSC_0618.jpg]
[Image: DSC_0620.jpg]
[Image: DSC_0622.jpg]
[Image: DSC_0621.jpg]
[Image: DSC_0624.jpg]
[Image: DSC_0628.jpg]
[Image: DSC_0648.jpg]
[Image: DSC_0514.jpg]
[Image: DSC_0526.jpg]
[Image: DSC_0528.jpg]
[Image: DSC_0529.jpg]
[Image: DSC_0532.jpg]
[Image: DSC_0534.jpg]
[Image: DSC_0547.jpg]
[Image: DSC_0561.jpg]
[Image: DSC_0562.jpg]
[Image: DSC_0587.jpg]
[Image: DSC_0599.jpg]
[Image: DSC_0603.jpg]

Thanks for looking!
- Dan K.
Sold- 02 Wrangler TJ- 3 in. Tera/skyjacker lift, 32in. Pro Comp MT's, RC Swaybar Disco's, RC HD adj. track arm, borla exhaust, airaid intake
Then- 2010 Grand Cherokee Laredo- with the brutally fast mini van motor
......totaled
Now- 2012 VW Passat SE- Manual - 5 banger

Dan Kastner
Premier Shine Auto Detailing
www.premiershinedetail.com
dan@premiershinedetail.com

Got detail/ car care questions? PM or email me and I am more than happy to help!
  Reply


Forum Jump: