Dyno Session at E.T. Motorsports, Oct 1st **changed**

PDenbigh · 09-28-2005, 02:45 PM

I Am scheduled for 12:00 and 2:00, but will be going down earlier. When is everyone else scheduled?

Evan · 09-28-2005, 03:05 PM

Ryan T Wrote:I kinda doubt they'll do one pull each. It takes twice as long to strap a car down as it does to do a pull.

:roll:
I seriously doubt it takes more than 10 minutes to strap a car down, $50 should buy at least a solid 30 minutes of total time

**Ryan T** · 09-28-2005, 03:13 PM

Evan Wrote:
Ryan T Wrote:I kinda doubt they'll do one pull each. It takes twice as long to strap a car down as it does to do a pull.
:roll:
I seriously doubt it takes more than 10 minutes to strap a car down, $50 should buy at least a solid 30 minutes of total time

\

Yeah, it only takes ten minutes to strap a car down and hook the sensor up to your exhaust pipe and such, but it only takes about 45 seconds to do a pull. That's a lot of extra work to just do one pull and then take it all back off and only get $20.

Dave · 09-28-2005, 04:30 PM

ok, so Pete, Adam, and I are the only ones going to this. Anybody else want to go? I'll be doing my pull on the 240 at 8am. I have to work 9-2 at Toyota and 3-11 at Sheetz, so that is pretty much the only time I could run.

**Ryan T** · 09-28-2005, 04:33 PM

I'll be there, but I won't be dynoing. I haven't done any mods since the last time I was on a dyno, so theres really no point.

***ViPER1313*** · 09-28-2005, 05:11 PM

My appointment is at 2:30, right after Petes 2nd run. You guys want to meet up someplace?

D_Eclipse9916 · 09-28-2005, 11:18 PM

Yeah im in to go look, but I literally dont have 50 bucks to do it. Circuit City hopefully will hire me in their tech bay, then it will be MAD MODDING TIME!!! woohoo...

**JustinG** · 10-01-2005, 02:32 AM

so where we meetings???????

**Mike** · 10-01-2005, 02:43 AM

ew for some reason i thought this was in or around nova... im out for meeting your guys! Tongue

**JustinG** · 10-01-2005, 09:54 AM

if anyone decides call my cell 1-434-390-6300

Dave · 10-01-2005, 12:25 PM

129 hp, 132 trq from the 240 pile.

***ViPER1313*** · 10-01-2005, 06:55 PM

Power is about where it should have been, A/F is very lean at lower RPMs -

HAULN-SS · 10-01-2005, 10:50 PM

Definately cant read that image...have something higher res?

lillitnn92 · 10-01-2005, 11:29 PM

HAULN-SS Wrote:Definately cant read that image...have something higher res?

click on it! Smile

ScottyB · 10-02-2005, 12:08 AM

Adam....i was very surprised. for an older vehicle your engine is really stout.

and Dave, the fact that you can get your 240 around a track like you do with 130 whp or so is pretty awesome. gotta love the torque!

PDenbigh · 10-02-2005, 02:56 PM

Had some fun with the XR! Set the boost at 18psi, drove it around for 4 hard runs to make sure we didn't hear detonation, and then put it on the dyno.

Max Power: 302.4
Max Torque 310.0

At the wheels :-)

I feel good about these numbers because they were real world. It was an already hot engine from our 4 runs, and the dyno was in the direct sun. The second run with abour 30 seconds cooldown lost a coupel of HP but still right there, so I feel it's a pretty repeatable number.

Sadly, I know have the boost turned back down for the track, but it was quite fun that that level!

Good to see everyone there!

.RJ · 10-02-2005, 02:59 PM

nice numbers pete.

You should be "turning it to 11" for the track! Smile

lillitnn92 · 10-02-2005, 02:59 PM

sweet!!

Nis01 · 10-02-2005, 03:08 PM

Impressive numbers... no need to turn it down... :twisted:

ScottyB · 10-02-2005, 05:02 PM

wow Pete, that's hot

Login




Remember me Lost Password?