08-20-2015, 02:52 PM
I know this is a long shot… so tell your friends and family too!
10.5 inch Pistol builds (you really should buy it and make it an SBR and add a suppressor) especially in 300BLK caliber aren’t every shooters cup of tea… but here you are. This project started a while ago and never got off the ground because 300BLK is more of a reloaders round. It’s never been fired AND needs a bolt carrier assembly to be complete. Any 5.56 BCA will work, but if you go with a suppressor and want to side charge, I ONLY use Young Manufacturing side charge BCA (they just wipe clean).
I’ve added some parts (and I’ll verify and update the post) since these pictures, if you are serious about it just PM me your cell and I’ll text you minty fresh pics. This pistol has over $1300 in parts plus machine time. I’m open to offers… I’ll need to see the right credentials to sell (standard gun sale stuff).
The Upper:
Mega Side Charge Upper
Alpha Shooting Sports 10.5 inch Melonite Barrel
Lancer 12 inch Carbon Fiber HG with front sight rail
Magpul MBUS Pro Front and Rear Sights
Russian Muzzle Device to simulate the weight of a suppressor
BCM Mod 3 Charging Handle (I think)
Daniel Defense Clamping Low Pro Gas Block
The Lower:
Billet Non Ambi Lower
Phase 5 Metal Bolt Release
Phase 5 Trigger Guard
KNS/Spike Tactical Anti Rotation Pins
Spikes Tactical Enhanced Parts Kit with Trigger
Battle Arms 45* Safety
Battle Arms Steel Take Down Pins
***as the build evolved some of the parts changed, not all the parts are in the pics but I can send a serious buyer pics***
Now for PICS:
KAC front sight vs. the Magpul Pro
![[Image: IMG_1327_zpspwf0n0wt.jpg]](http://i883.photobucket.com/albums/ac32/JMURACN/IMG_1327_zpspwf0n0wt.jpg)
![[Image: IMG_1325_zpsmskmexwl.jpg]](http://i883.photobucket.com/albums/ac32/JMURACN/IMG_1325_zpsmskmexwl.jpg)
![[Image: IMG_1317_zpspwgn3lqn.jpg]](http://i883.photobucket.com/albums/ac32/JMURACN/IMG_1317_zpspwgn3lqn.jpg)
MAG not included
![[Image: IMG_1172_zpsappee3e2.jpg]](http://i883.photobucket.com/albums/ac32/JMURACN/IMG_1172_zpsappee3e2.jpg)
Barrel is shorter than the HG
![[Image: IMG_1171_zpsxyruddrv.jpg]](http://i883.photobucket.com/albums/ac32/JMURACN/IMG_1171_zpsxyruddrv.jpg)
![[Image: IMG_1165_zps3ukvmpyc.jpg]](http://i883.photobucket.com/albums/ac32/JMURACN/IMG_1165_zps3ukvmpyc.jpg)
![[Image: IMG_1284_zps8m8hihku.jpg]](http://i883.photobucket.com/albums/ac32/JMURACN/IMG_1284_zps8m8hihku.jpg)
![[Image: IMG_1174_zpsbztqptes.jpg]](http://i883.photobucket.com/albums/ac32/JMURACN/IMG_1174_zpsbztqptes.jpg)
Does NOT have the Troy Claymore anymore
10.5 inch Pistol builds (you really should buy it and make it an SBR and add a suppressor) especially in 300BLK caliber aren’t every shooters cup of tea… but here you are. This project started a while ago and never got off the ground because 300BLK is more of a reloaders round. It’s never been fired AND needs a bolt carrier assembly to be complete. Any 5.56 BCA will work, but if you go with a suppressor and want to side charge, I ONLY use Young Manufacturing side charge BCA (they just wipe clean). I’ve added some parts (and I’ll verify and update the post) since these pictures, if you are serious about it just PM me your cell and I’ll text you minty fresh pics. This pistol has over $1300 in parts plus machine time. I’m open to offers… I’ll need to see the right credentials to sell (standard gun sale stuff).
The Upper:
Mega Side Charge Upper
Alpha Shooting Sports 10.5 inch Melonite Barrel
Lancer 12 inch Carbon Fiber HG with front sight rail
Magpul MBUS Pro Front and Rear Sights
Russian Muzzle Device to simulate the weight of a suppressor
BCM Mod 3 Charging Handle (I think)
Daniel Defense Clamping Low Pro Gas Block
The Lower:
Billet Non Ambi Lower
Phase 5 Metal Bolt Release
Phase 5 Trigger Guard
KNS/Spike Tactical Anti Rotation Pins
Spikes Tactical Enhanced Parts Kit with Trigger
Battle Arms 45* Safety
Battle Arms Steel Take Down Pins
***as the build evolved some of the parts changed, not all the parts are in the pics but I can send a serious buyer pics***
Now for PICS:
KAC front sight vs. the Magpul Pro
![[Image: IMG_1327_zpspwf0n0wt.jpg]](http://i883.photobucket.com/albums/ac32/JMURACN/IMG_1327_zpspwf0n0wt.jpg)
![[Image: IMG_1325_zpsmskmexwl.jpg]](http://i883.photobucket.com/albums/ac32/JMURACN/IMG_1325_zpsmskmexwl.jpg)
![[Image: IMG_1317_zpspwgn3lqn.jpg]](http://i883.photobucket.com/albums/ac32/JMURACN/IMG_1317_zpspwgn3lqn.jpg)
MAG not included
![[Image: IMG_1172_zpsappee3e2.jpg]](http://i883.photobucket.com/albums/ac32/JMURACN/IMG_1172_zpsappee3e2.jpg)
Barrel is shorter than the HG
![[Image: IMG_1171_zpsxyruddrv.jpg]](http://i883.photobucket.com/albums/ac32/JMURACN/IMG_1171_zpsxyruddrv.jpg)
![[Image: IMG_1165_zps3ukvmpyc.jpg]](http://i883.photobucket.com/albums/ac32/JMURACN/IMG_1165_zps3ukvmpyc.jpg)
![[Image: IMG_1284_zps8m8hihku.jpg]](http://i883.photobucket.com/albums/ac32/JMURACN/IMG_1284_zps8m8hihku.jpg)
![[Image: IMG_1174_zpsbztqptes.jpg]](http://i883.photobucket.com/albums/ac32/JMURACN/IMG_1174_zpsbztqptes.jpg)
Does NOT have the Troy Claymore anymore
#99 - 2000 Civic Si (Future H2 Car, Former H1 car)
IPGparts.com, AutoFair Honda, Amsoil, QuikLatch Fasteners
NASA-MA Tech Inspector (Retired)
IPGparts.com, AutoFair Honda, Amsoil, QuikLatch Fasteners
NASA-MA Tech Inspector (Retired)
