Finally! (Project SHO)

[ViPER1313]

Update:

Got car inspected - they failed it for CV joints, tint, a burnt rear taillight, leaking PS rack and tie rods (they seemed fine to me, I will fight this.) They failed to see that the parking lights were broken and a rim was dented though .

Things the car needs (bold fixed):
-New front axles / CV Joints
-Bulb for rear taillight
-1 new rim (dented - cause of vibration and tire leak)
-Bottle of stop leak for steering and a change to PS Fluid as opposed to ATF (only on a Ford would they use Type F ATF for PS fluid :roll: )
-Tie rods????
-Gas Cap
-IAC cleaned
-New headlight panel (cracked)
-Clutch / PP / TOB (clutch holds and the transmission shifts fine but throughout bearing is screwed and sounds like a chainsaw every time you hit the clutch - still has some life left in it)
-Headlight clips (can't find the right ones at any auto parts store)
-Various bolts and screws
-Headlight bulb
-New radiator overflow tank
-Wiper blades
-Seat covers (cause the seats are jacked)
-Stereo
-Gauge dimmer switch
-Rearview mirror installed (got one at junkyard)
-Taillights fixed (don't turn on with headlights but brake lights work)
-Front plate mounted
-Brakes bled - will need to be done again or the brake booster needs replacement?? The pedal does not start to work until about half way down, but when it does it feels fine and the brakes will lock if enough pressure is applied - no pulling either.

I promise pictures will follow 8)