05-31-2005, 10:26 AM
i would think it's the linkages. sounds like it's only going halfway into gear, then when you let the clutch out the gear is popping out and grinding against the teeth of the gear its supposed to be engaged with.
is there any way you can look at the linkages without dropping the engine or tranny? i know on Jay's A2 dub, we can actually see the linkages for the tranny and were able to look at the slop in the shifting arms/mechanisms. in Jay's case, it looks like either new parts are needed, or at least new bushings.
is there any way you can look at the linkages without dropping the engine or tranny? i know on Jay's A2 dub, we can actually see the linkages for the tranny and were able to look at the slop in the shifting arms/mechanisms. in Jay's case, it looks like either new parts are needed, or at least new bushings.
2010 Civic Si
2019 4Runner TRD Off-Road
--------------------------
Past: 03 Xterra SE 4x4 | 05 Impreza 2.5RS | 99.5 A4 Quattro 1.8T | 01 Accord EX | 90 Maxima GXE | 96 Explorer XLT
2019 4Runner TRD Off-Road
--------------------------
Past: 03 Xterra SE 4x4 | 05 Impreza 2.5RS | 99.5 A4 Quattro 1.8T | 01 Accord EX | 90 Maxima GXE | 96 Explorer XLT