07-05-2019, 05:48 PM
The 400F is back together and running well so this one is back on track....
Got everything out and organized, which allowed me to consolidate the parts a bit - everything is boxed back up by sub-assembly (controls, electrical, fuel, etc).
![[Image: IMG_3455-X3.jpg]](https://photos.smugmug.com/Galleries/Project-1972-CB350/i-44SQMDf/0/8a0a8c08/X3/IMG_3455-X3.jpg)
![[Image: IMG_3451-X3.jpg]](https://photos.smugmug.com/Galleries/Project-1972-CB350/i-bppBQzW/0/19203c80/X3/IMG_3451-X3.jpg)
Motor on the bench
![[Image: IMG_3457-X3.jpg]](https://photos.smugmug.com/Galleries/Project-1972-CB350/i-8gvzkRL/0/fc79a75f/X3/IMG_3457-X3.jpg)
Motor apart
![[Image: IMG_3456-X3.jpg]](https://photos.smugmug.com/Galleries/Project-1972-CB350/i-jzVtj4J/0/0524ddac/X3/IMG_3456-X3.jpg)
![[Image: IMG_3459-X3.jpg]](https://photos.smugmug.com/Galleries/Project-1972-CB350/i-TXM7TV5/0/889c310a/X3/IMG_3459-X3.jpg)
![[Image: IMG_3458-X3.jpg]](https://photos.smugmug.com/Galleries/Project-1972-CB350/i-Gxv934t/0/af7343ea/X3/IMG_3458-X3.jpg)
![[Image: IMG_3460-X3.jpg]](https://photos.smugmug.com/Galleries/Project-1972-CB350/i-twWKnXF/0/da5ea7ea/X3/IMG_3460-X3.jpg)
Next up, vapor blasting all the cases, covers, jugs, etc. Hope to have that done soon but while the motor is out I can work on assembling the rolling chassis.
I'm also really glad I built more work surface than I thought I needed. Its working out well.
Got everything out and organized, which allowed me to consolidate the parts a bit - everything is boxed back up by sub-assembly (controls, electrical, fuel, etc).
![[Image: IMG_3455-X3.jpg]](https://photos.smugmug.com/Galleries/Project-1972-CB350/i-44SQMDf/0/8a0a8c08/X3/IMG_3455-X3.jpg)
![[Image: IMG_3451-X3.jpg]](https://photos.smugmug.com/Galleries/Project-1972-CB350/i-bppBQzW/0/19203c80/X3/IMG_3451-X3.jpg)
Motor on the bench
![[Image: IMG_3457-X3.jpg]](https://photos.smugmug.com/Galleries/Project-1972-CB350/i-8gvzkRL/0/fc79a75f/X3/IMG_3457-X3.jpg)
Motor apart
![[Image: IMG_3456-X3.jpg]](https://photos.smugmug.com/Galleries/Project-1972-CB350/i-jzVtj4J/0/0524ddac/X3/IMG_3456-X3.jpg)
![[Image: IMG_3459-X3.jpg]](https://photos.smugmug.com/Galleries/Project-1972-CB350/i-TXM7TV5/0/889c310a/X3/IMG_3459-X3.jpg)
![[Image: IMG_3458-X3.jpg]](https://photos.smugmug.com/Galleries/Project-1972-CB350/i-Gxv934t/0/af7343ea/X3/IMG_3458-X3.jpg)
![[Image: IMG_3460-X3.jpg]](https://photos.smugmug.com/Galleries/Project-1972-CB350/i-twWKnXF/0/da5ea7ea/X3/IMG_3460-X3.jpg)
Next up, vapor blasting all the cases, covers, jugs, etc. Hope to have that done soon but while the motor is out I can work on assembling the rolling chassis.
I'm also really glad I built more work surface than I thought I needed. Its working out well.
