nice rain last weekend so got the last of the insulation in the roof. much easier on the more open radius at the top section of the roof but still not a job i want to do again soon.
quick how-to guide
step 1: apply glue
step 2: tighten straps
step 3: throw your crap on the roof. any crap will do.
![[Image: LB5rNus.jpg]](https://i.imgur.com/LB5rNus.jpg)
first roof panel getting adhered, second/last one went on yesterday. screwed into the roof spars until the adhesive cures to help it contour. shits gettin real now boys.
![[Image: nVeqa4c.jpg]](https://i.imgur.com/nVeqa4c.jpg)
did a lot of this. like, a lot. probably 150 went in, and they all came back out. took 2 battery swaps.
![[Image: dqZw2Rz.jpg]](https://i.imgur.com/dqZw2Rz.jpg)
laminate bit made short work of opening the roof vent back up again.
![[Image: keJqsJs.jpg]](https://i.imgur.com/keJqsJs.jpg)
not shown: galley is basically done. i didn't send screws through any wires (that i know of). varnished the sides and inside the cabin and need to do another coat on all of it.
current goals: within the month build and skin the galley hatch and order the aluminum skin and trim. need to double check my wheel size and order appropriate fenders. need to order both side doors.
big fancy goal: blue ridge parkway trip by october/november. i'm feelin it.
quick how-to guide
step 1: apply glue
step 2: tighten straps
step 3: throw your crap on the roof. any crap will do.
![[Image: LB5rNus.jpg]](https://i.imgur.com/LB5rNus.jpg)
first roof panel getting adhered, second/last one went on yesterday. screwed into the roof spars until the adhesive cures to help it contour. shits gettin real now boys.
![[Image: nVeqa4c.jpg]](https://i.imgur.com/nVeqa4c.jpg)
did a lot of this. like, a lot. probably 150 went in, and they all came back out. took 2 battery swaps.
![[Image: dqZw2Rz.jpg]](https://i.imgur.com/dqZw2Rz.jpg)
laminate bit made short work of opening the roof vent back up again.
![[Image: keJqsJs.jpg]](https://i.imgur.com/keJqsJs.jpg)
not shown: galley is basically done. i didn't send screws through any wires (that i know of). varnished the sides and inside the cabin and need to do another coat on all of it.
current goals: within the month build and skin the galley hatch and order the aluminum skin and trim. need to double check my wheel size and order appropriate fenders. need to order both side doors.
big fancy goal: blue ridge parkway trip by october/november. i'm feelin it.
2010 Civic Si
2019 4Runner TRD Off-Road
--------------------------
Past: 03 Xterra SE 4x4 | 05 Impreza 2.5RS | 99.5 A4 Quattro 1.8T | 01 Accord EX | 90 Maxima GXE | 96 Explorer XLT
2019 4Runner TRD Off-Road
--------------------------
Past: 03 Xterra SE 4x4 | 05 Impreza 2.5RS | 99.5 A4 Quattro 1.8T | 01 Accord EX | 90 Maxima GXE | 96 Explorer XLT

