03-24-2019, 09:13 PM
Dropped the transmission and pulled off the old clutch today,
![[Image: 3F1U13N.jpg]](https://i.imgur.com/3F1U13N.jpg)
![[Image: HRfesnm.jpg]](https://i.imgur.com/HRfesnm.jpg)
Somebody before installed a 6 puck clutch. As we were impacting off the pressure plate, tons of crumbling dust was falling off. The clutch disk was worn straight against the studs, and literally falling apart. Also with the transmission out the car, the throw out bearing was sliding super sticky from the grease that gummed up. Explains why the clutch pedal was sticky and grabbing at the very last inch of throw.
Going to get some of the small parts washed in a parts washer just because. And pick up a trans driveshaft seal + rear main seal .
Somebody before installed a 6 puck clutch. As we were impacting off the pressure plate, tons of crumbling dust was falling off. The clutch disk was worn straight against the studs, and literally falling apart. Also with the transmission out the car, the throw out bearing was sliding super sticky from the grease that gummed up. Explains why the clutch pedal was sticky and grabbing at the very last inch of throw.
Going to get some of the small parts washed in a parts washer just because. And pick up a trans driveshaft seal + rear main seal .