10-27-2018, 07:40 PM
Well the pushrods all spun freely so I doubt any are bent. I'm thinking my rings might be seated which is what I figured after my leak down test the first time. With cylinders 4 and 5 I'd get a bad reading (30%), spin the motor back around and then get a good reading(95%). Ordered a compression tester and will see if 4 and 5 are acting up still. I can add oil if they are to see if I can rule out the valves. I'm thinking I may just be floating the valves a bit. I shouldn't be since I don't really run it past 5k but all signs are kinda pointing to that idk. We'll see...