06-23-2018, 11:15 PM
Plz help
Bought four brand new pistons, cleaned the calipers/seals, and put back together. After pumping the brakes, I still am only getting one piston to move. The pistons seemed like a really tight fit, so I’m thinking maybe they need to be sanded down a little bit?
Now I’ve gotta get these pistons out again to figure out what’s going on. No access to compressed air, what’s the best way to get them out if they’re snug in there?
Bought four brand new pistons, cleaned the calipers/seals, and put back together. After pumping the brakes, I still am only getting one piston to move. The pistons seemed like a really tight fit, so I’m thinking maybe they need to be sanded down a little bit?
Now I’ve gotta get these pistons out again to figure out what’s going on. No access to compressed air, what’s the best way to get them out if they’re snug in there?
Current:
13' E92 M3 Comp | 05' Yahama R6 | 95' E36 M3
Past:
14' BMW 335xi GT | 06' Porsche Boxster S | 15' Jeep Grand Cherokee | 84' BMW 733i | 85' Honda Shadow VT700 | 06' Acura TL