i has a ceiling
![[Image: x6KF5kX.jpg]](https://i.imgur.com/x6KF5kX.jpg)
the gaps between the wall and ceiling, and wall and floor are no big deal. its cinched down tight with the roof spars on the outside, plus glue on the edges. a small run of trim will cover the gaps. not sure if i'll try to bend the walnut scrap i'm using or if i should just get some thin dowel and stain it walnut.
![[Image: RtZ8ZSz.jpg]](https://i.imgur.com/RtZ8ZSz.jpg)
minor seam joint will be covered by a run of cubbie storage nooks so no big deal.
![[Image: 1bWCtWQ.jpg]](https://i.imgur.com/1bWCtWQ.jpg)
he fits, he sits
![[Image: 6q026wc.jpg]](https://i.imgur.com/6q026wc.jpg)
we'll run these cedar closet planks up the front wall for a couple feet, as a "headboard", because shiplap is love, shiplap is life
![[Image: x6KF5kX.jpg]](https://i.imgur.com/x6KF5kX.jpg)
the gaps between the wall and ceiling, and wall and floor are no big deal. its cinched down tight with the roof spars on the outside, plus glue on the edges. a small run of trim will cover the gaps. not sure if i'll try to bend the walnut scrap i'm using or if i should just get some thin dowel and stain it walnut.
![[Image: RtZ8ZSz.jpg]](https://i.imgur.com/RtZ8ZSz.jpg)
minor seam joint will be covered by a run of cubbie storage nooks so no big deal.
![[Image: 1bWCtWQ.jpg]](https://i.imgur.com/1bWCtWQ.jpg)
he fits, he sits
![[Image: 6q026wc.jpg]](https://i.imgur.com/6q026wc.jpg)
we'll run these cedar closet planks up the front wall for a couple feet, as a "headboard", because shiplap is love, shiplap is life
2010 Civic Si
2019 4Runner TRD Off-Road
--------------------------
Past: 03 Xterra SE 4x4 | 05 Impreza 2.5RS | 99.5 A4 Quattro 1.8T | 01 Accord EX | 90 Maxima GXE | 96 Explorer XLT
2019 4Runner TRD Off-Road
--------------------------
Past: 03 Xterra SE 4x4 | 05 Impreza 2.5RS | 99.5 A4 Quattro 1.8T | 01 Accord EX | 90 Maxima GXE | 96 Explorer XLT

