01-17-2018, 09:23 PM
So the cam seems to be undamaged. I was getting the right lift on the lobes I could check. Someone made a good point that if the lifters were in good shape then that lobe is most likely fine. I suppose it's awfully difficult to partially wipe a lobe in 150 miles, they flatten pretty fast when things are properly fucked. Checked the pushrods that weren't bent and they all came within .005" of 7.500" so I only ordered six new pushrods.
Got the rockershafts and rocker arms where they need to go now. Just need to throw the new pushrods in when they get here, torque down the rockershaft and reinstall the intake. Definitely going to pull the valve covers and make sure everything is oiling well when it's back together. Thankfully it's going to be mid 50s this weekend.
Got the rockershafts and rocker arms where they need to go now. Just need to throw the new pushrods in when they get here, torque down the rockershaft and reinstall the intake. Definitely going to pull the valve covers and make sure everything is oiling well when it's back together. Thankfully it's going to be mid 50s this weekend.