04-21-2016, 02:12 PM
Those brake ducts won't do much unless the air is directly pointed at the rotor vanes... The ones you posted seem to fall short of the rotor by a bit.
You'd want something like this:![[Image: 74615d1272062683-home-made-brake-duct-ki...g_6601.jpg]](http://themustangsource.com/forums/attachments/f637/74615d1272062683-home-made-brake-duct-kit-finished-step-step-pictures-img_6601.jpg)
Where the hose connects to the bracket and the air is fed to the rotor.
Do you have backing plates behind your rotors? They come from the factory to prevent rocks/etc getting stuck inside the rotor, if you do... yank those out if you can w/o pressing out the hub.
Also maybe you are just overworking the pads and they are exceeding the temperature ratings? No clue what you are running, so :dunno:
You'd want something like this:
Where the hose connects to the bracket and the air is fed to the rotor.
Do you have backing plates behind your rotors? They come from the factory to prevent rocks/etc getting stuck inside the rotor, if you do... yank those out if you can w/o pressing out the hub.
Also maybe you are just overworking the pads and they are exceeding the temperature ratings? No clue what you are running, so :dunno: