08-13-2015, 08:44 AM
you can remove the caliper and grease the slider pins with a high temp grease. you don't need much and it should last a good long while as long as the rubber bellows on the pins aren't torn open.
if the caliper can't move back and forth on the pins i could see how it might not be able to properly grip the rotor or might drag on one side instead.
if the caliper can't move back and forth on the pins i could see how it might not be able to properly grip the rotor or might drag on one side instead.
2010 Civic Si
2019 4Runner TRD Off-Road
--------------------------
Past: 03 Xterra SE 4x4 | 05 Impreza 2.5RS | 99.5 A4 Quattro 1.8T | 01 Accord EX | 90 Maxima GXE | 96 Explorer XLT
2019 4Runner TRD Off-Road
--------------------------
Past: 03 Xterra SE 4x4 | 05 Impreza 2.5RS | 99.5 A4 Quattro 1.8T | 01 Accord EX | 90 Maxima GXE | 96 Explorer XLT