03-31-2015, 11:33 PM
JustinG Wrote:class 10.9 is metric, grade 8 is standard. What size, length, and thread pitch do you need, ill see if i can find em.
Edit: I just reread this. You need longer bolts yes? That simply go through the car and topmounts and you tighten a nut on the bottom?
So just get any class 10.9 12 x 1.XX, 90mm bolt you can find and the corresponding nuts that fit. The second number in 12 x X.XX is just the thread pitch. So as long as you get the same size/pitch nuts you're golden.
rherold9 Wrote:Edit#2: Finally: <!-- m --><a class="postlink" href="https://www.belmetric.com/bh12x125x90-hex-bolt-109-p-2554.html?cPath=506_510_411">https://www.belmetric.com/bh12x125x90-h ... 06_510_411</a><!-- m -->
It's okay I found some. Just took awhile. They are rare in the size and thread pitch for that high of a class. Could only find 8.8 class in the size for awhile. There is no nut. Literally just threads into the bottom arm with a thick washer. You can't reach the other side it is covered.