Project: Summit Point Bed and Breffiss!

[Kaan]

Today I decided to tackle some of the shelves in the garage. We move in next week so I'll need some place to stack things. We have a bunch of these black/yellow totes that we use, so I wanted to build around that... but i also wanted the lower portion tall enough to tuck a long block, compressor, or whatever under.

1lb 3 inch nails
1lb 2 inch nails
11 2x4 (8 feet long)
1 4x8 Plywood sheet (ripped to 16inch by 92inches)




YES RJ... i used a level AND a square


I pinned the 2x4s to the wall (through the studs)... the "tops" and the wall mounts were predrilled and marked for easy alignment (i was working alone so i only had two hands)


They were pretty strong on their own... and only about 1/8 inch off from the wall to the front. So i started measuring for legs


Dont worry... no beers were consumed while playing with power tools alone in the middle of no where. Most of the tools and my beer sign