02-29-2012, 03:03 PM
i have completed the exhaust side of the head. I will probably post some pictures soon. i also "built" a head holder out of a box... super important to keep things level and easy to flip/rotate the head.
two things to note:
1. when using sanding drums with the dremel, keep your RPMs down around 6-8k or you will burn through sanding drums
2. the dremel rotates clockwise and i found it easier to control when i moved the dremel COUNTER clockwise (or oppostite the spin)
two things to note:
1. when using sanding drums with the dremel, keep your RPMs down around 6-8k or you will burn through sanding drums
2. the dremel rotates clockwise and i found it easier to control when i moved the dremel COUNTER clockwise (or oppostite the spin)
#99 - 2000 Civic Si (Future H2 Car, Former H1 car)
IPGparts.com, AutoFair Honda, Amsoil, QuikLatch Fasteners
NASA-MA Tech Inspector (Retired)
IPGparts.com, AutoFair Honda, Amsoil, QuikLatch Fasteners
NASA-MA Tech Inspector (Retired)