Project RS

[ScottyB]

i rushed it a bit but it came out nice. i did about half the recommended passes due to time constraints. my drill also tops out at only 750 rpm which is lower than 3M's 1200-1600 rpm specification. there are still some minor sanding scratches but you really have to be looking for them. i have plenty of discs and compound left so this was worth it for me, and the Xterra is up next.

before and after:







it was a bit unsettling to turn the lenses into plastic dust but once you get a feel for it, it's easy and the directions are great. 2 zombie thumbs up.