06-21-2008, 05:47 PM
Set your corners. Use your favorite pythagorean triple anywhere there is going to be a right angle. This will ensure your corners are square, and your deck is square with the house.
![[Image: n7805974_37121573_3682.jpg]](http://photos-f.ak.facebook.com/photos-ak-snc1/v275/37/27/7805974/n7805974_37121573_3682.jpg)
I used 3, 4 and 5. That is, 3 feet down one side, and 4 feet down the other will leave me with exactly 5 feet between the marks on my string, if i am square.
![[Image: n7805974_37121576_4527.jpg]](http://photos-a.ak.facebook.com/photos-ak-snc1/v275/37/27/7805974/n7805974_37121576_4527.jpg)
Use these to dig foundation holes for the posts. 2 square feet x 30" deep (depth depends on location)
![[Image: n7805974_37121577_4804.jpg]](http://photos-b.ak.facebook.com/photos-ak-snc1/v275/37/27/7805974/n7805974_37121577_4804.jpg)
Two hours of digging through solid shale got me this:
![[Image: n7805974_37121574_3954.jpg]](http://photos-g.ak.facebook.com/photos-ak-snc1/v275/37/27/7805974/n7805974_37121574_3954.jpg)
Fuck that. Bringing in the big guns.
![[Image: n7805974_37121572_3329.jpg]](http://photos-e.ak.facebook.com/photos-ak-snc1/v275/37/27/7805974/n7805974_37121572_3329.jpg)
After a couple hours, i end up with 5 holes, eight feet apart. The basic design I am going with is 32' x 12'. The holes are 10' out from the house, so that I can do a 2' cantalever for the final width.
![[Image: n7805974_37121573_3682.jpg]](http://photos-f.ak.facebook.com/photos-ak-snc1/v275/37/27/7805974/n7805974_37121573_3682.jpg)
I used 3, 4 and 5. That is, 3 feet down one side, and 4 feet down the other will leave me with exactly 5 feet between the marks on my string, if i am square.
![[Image: n7805974_37121576_4527.jpg]](http://photos-a.ak.facebook.com/photos-ak-snc1/v275/37/27/7805974/n7805974_37121576_4527.jpg)
Use these to dig foundation holes for the posts. 2 square feet x 30" deep (depth depends on location)
![[Image: n7805974_37121577_4804.jpg]](http://photos-b.ak.facebook.com/photos-ak-snc1/v275/37/27/7805974/n7805974_37121577_4804.jpg)
Two hours of digging through solid shale got me this:
![[Image: n7805974_37121574_3954.jpg]](http://photos-g.ak.facebook.com/photos-ak-snc1/v275/37/27/7805974/n7805974_37121574_3954.jpg)
Fuck that. Bringing in the big guns.
![[Image: n7805974_37121572_3329.jpg]](http://photos-e.ak.facebook.com/photos-ak-snc1/v275/37/27/7805974/n7805974_37121572_3329.jpg)
After a couple hours, i end up with 5 holes, eight feet apart. The basic design I am going with is 32' x 12'. The holes are 10' out from the house, so that I can do a 2' cantalever for the final width.
