08-22-2004, 05:13 PM
So I started taking apart my front brakes and I pulled all the pins out. Got the pads out with little to no problems. Then I wanted to compress the pistons back into the calipers to make more room for the beefier pads. 3 of the 4 pistons went back in when I clamped at them with a pipe wrench. The 4th wouldn't go in at all tho.
Then I did something stupid. I hit the brakes once to try to dislodge the the 4th piston, and the 4th didn't move... but another did. Now, there's like 5mm between one piston and the rotor.... and the 4th is still stuck. What do I do? I'm about to just ebrake it over to a shop. Advice?
Then I did something stupid. I hit the brakes once to try to dislodge the the 4th piston, and the 4th didn't move... but another did. Now, there's like 5mm between one piston and the rotor.... and the 4th is still stuck. What do I do? I'm about to just ebrake it over to a shop. Advice?
My Tumblr
2008 Felt F75 - Pedal Power
2008 Felt F75 - Pedal Power