03-27-2008, 01:46 PM
Roll bar is a sore spotThe guy is great with muscle cars but screwed me pretty good. The swing outs were the wrong style mounted in the wrong place, the harness bar is too far forward, lost 3 inches of rearward seat travel, the rear down bars should go to the wheel humps not the middle of the floor.
So, you donÔÇÖt want to use him.
We have AR Fabrication here in Winchester and you can always talk to the JL Fabrication in Harrisonburg. Drop by one day to JL (1187 N. Liberty St) and talk to Rob or Jamie.
So, you donÔÇÖt want to use him.
We have AR Fabrication here in Winchester and you can always talk to the JL Fabrication in Harrisonburg. Drop by one day to JL (1187 N. Liberty St) and talk to Rob or Jamie.
Current: 1985 LS1 Corvette | 2014 328i Wagon F31
Former: 2010 Ford Edge | 1999 Integra GS
I have a little bit of a rub near lock but if you are turned to lock on a track there are other problems already...
Former: 2010 Ford Edge | 1999 Integra GS
I have a little bit of a rub near lock but if you are turned to lock on a track there are other problems already...