06-26-2007, 02:55 PM
You can check bump travel in the garage - jack the car up, take off the wheels, set it down with jackstands on the lower control arms as close to the hub as possible - measure how much shock travel is available. Measure the spring length... jack car up, and measure spring free length. You should be able to find the coil bind point by looking at the spring catalog on the eibach website.
Edit - on the racekaaa I had 2.25" - 2.5" of bump travel, and with 6" springs it was just under the coil bind limit.
Edit - on the racekaaa I had 2.25" - 2.5" of bump travel, and with 6" springs it was just under the coil bind limit.