01-03-2007, 01:05 PM
Mike Wrote:axxis ultimates. the way the e-brake line is routed, suspension travel (even though i have little to none during normal driving w/ 800lb/in springs) could pull the cable a little.
if it isn't that there would be no reason for more rub during cornering... the disc shouldn't have a different range of motion or axis or whatever than anything else since it's all bolted up... get me? am i right? unless those bolted together metal bits flex a tiny bit?
no, i definitely get you. i was thinking that maybe if you had stock pads they could have overheated and left a fat deposit or two.
also, the pads float around in their carriers when you're off the brakes, right? so in a turn could they not be subjected to g-forces and harmlessly ride up against the brake rotor? maybe that's making the noise.
2010 Civic Si
2019 4Runner TRD Off-Road
--------------------------
Past: 03 Xterra SE 4x4 | 05 Impreza 2.5RS | 99.5 A4 Quattro 1.8T | 01 Accord EX | 90 Maxima GXE | 96 Explorer XLT
2019 4Runner TRD Off-Road
--------------------------
Past: 03 Xterra SE 4x4 | 05 Impreza 2.5RS | 99.5 A4 Quattro 1.8T | 01 Accord EX | 90 Maxima GXE | 96 Explorer XLT