Rental Tool Thread

[D_Eclipse9916]

Figured we didnt have one of these as a lot of forums do. Post up what you need/what you got and your terms. Of course, give a little "leeway" for MM people, I got tons of tools available, but will post up my larger items that typically people dont want to buy and need.

All of these available for Loan or Purchase.

Engine Hoist-
Either way, it is $125 up front. You can either return in within 4 months for your FULL balance back (for MM people only), or you can keep it up to 6 months for 25$. For every month past that, another $5 will not be returned from your balance. (This is just to make sure if in a year after you borrow it, you suddenly decide you want to give it back, and I have planned not to get it back so I might have bought another one).

Spring Compressor-
Either way, it is $30 up front. You can either return in within 4 months for your FULL balance back (for MM people only), or you can keep it up to 6 months for 15$. For every month past that, another $5 will not be returned from your balance. (This is just to make sure if in a year after you borrow it, you suddenly decide you want to give it back, and I have planned not to get it back so I might have bought another one).

Angle Grinder
Either way, it is $50 up front. You can either return in within 4 months for your FULL balance back (for MM people only), or you can keep it up to 6 months for 25$. For every month past that, another $5 will not be returned from your balance. (This is just to make sure if in a year after you borrow it, you suddenly decide you want to give it back, and I have planned not to get it back so I might have bought another one).

Ball Joint Pickle Tool
Either way, it is $40 up front. You can either return in within 4 months for your FULL balance back (for MM people only), or you can keep it up to 6 months for 25$. For every month past that, another $5 will not be returned from your balance. (This is just to make sure if in a year after you borrow it, you suddenly decide you want to give it back, and I have planned not to get it back so I might have bought another one).

[Kaan]

what? you have your own engine hoist and dont need mine anymore? lol...

[D_Eclipse9916]

I know I bought one, and thinking of how I was trying to find one, I figured we could have a thread for those who need it, makes it easier.

[Mike]

i have a honda axle nut socket. you really should buy your own since they're cheap and you'll need it again someday, but you're also welcome to borrow mine at shipping cost.

[ScottyB]

for subaru/nissan people

ÔÇó Torx T-70 , 1/2" drive for subaru tranny drain plug. this is expensive and you'll use it like twice over the life of your car.


ÔÇó 9/16 square socket, 1/2" drive for subaru rear diff drain plug or nissan rear diff drain plug (check applications). don't wanna risk rounding off your plug with your 1/2" drive? use this.


rental fee is the shipping cost to you and back from 30033.