Porting
#1
I need to know where around harrisonburg would a shop port my o2 housing for me? Its a 2g o2 housing and also how much are the prices around here? I dont have any tools to port the turbo myself, nevertheless the time to sit there and work at it, I have enough shit to install already.
  Reply
#2
I work with a guy that is doing all my porting on my head and manifolds. Should I ask him about it?
Jeff Morrison - Used Car Manager
Woodstock Garage, Inc.
Chrysler - Dodge - Jeep - RAM

Current Stable of Mopar Junk
57 Chrysler Windsor 4drHT - 67 Dodge D100 Short Bed Step Side - 71 Dodge Challenger - 91 Chrysler Lebaron LX 33k mile Survivor - 91 Dodge Dakota V8 - 05 Chrysler Crossfire Roadster - 08 Ram 2500 Cummins
  Reply
#3
I have had good experience with Dale Engineering, ask for Mark should you go.
http://www.85xr.com

1985 Merkur XR4Ti Track Car
2013 Ford F-150 FX4 Ecoboost
E46 BMW 330Ci Sport 5spd
1973 Honda CL125S
1985 Honda CX500
2013 Arctic Cat 700 ATV
2017 Onewheel +
  Reply
#4
Dale Eng. is the company that does all the machine work for Toyota, and probably the biggest name in automobile machine work in this area. I haven't used them, so I can't speak for the prices.
  Reply
#5
dave, what do you mean they do all the machine work for toyota? who is toyota? a certain race team? toyota that we can go to a dealership and buy?
I Am Mike
4 wheels:  '01 RAV4 (Formerly '93 Civic CX, '01 S2000, '10 GTI, '09 A4 Avant)
2 wheels: '12 Surly Cross-Check Custom | '14 Trek Madone 2.1 105 | '17 Norco Threshold SL Force 1 | '17 Norco Revolver 9.2 FS | '18 BMC Roadmachine 02 Two | '19 Norco Search XR Steel (Formerly '97 Honda VFR750F, '05 Giant TCR 2, '15 WeThePeople Atlas 24, '10 Scott Scale 29er XT, '11 Cervelo R3 Rival, '12 Ridley X-Fire Red)

No longer onyachin.
  Reply
#6
No.

The toyota dealership (and most other dealerships and shops in the area) send their machine work to Dale Engineering. Dealerships never do their own machining...
(09-25-2019, 03:18 PM)V1GiLaNtE Wrote: I think you need to see a mental health professional.
  Reply
#7
gotcha.
I Am Mike
4 wheels:  '01 RAV4 (Formerly '93 Civic CX, '01 S2000, '10 GTI, '09 A4 Avant)
2 wheels: '12 Surly Cross-Check Custom | '14 Trek Madone 2.1 105 | '17 Norco Threshold SL Force 1 | '17 Norco Revolver 9.2 FS | '18 BMC Roadmachine 02 Two | '19 Norco Search XR Steel (Formerly '97 Honda VFR750F, '05 Giant TCR 2, '15 WeThePeople Atlas 24, '10 Scott Scale 29er XT, '11 Cervelo R3 Rival, '12 Ridley X-Fire Red)

No longer onyachin.
  Reply
#8
If you could ask him about how much. I am a little short on money, someone stole 275 dollars cash from my room....
2020 Ford Raptor
2009 Z06
1986.5 Porsche 928S
  Reply
#9
D_Eclipse9916 Wrote:If you could ask him about how much.

Pick up the phone and call......
(09-25-2019, 03:18 PM)V1GiLaNtE Wrote: I think you need to see a mental health professional.
  Reply
#10
yeah, i don't deal with that kind of stuff. I just happen to know that they do our maching for us. Call them, they are in the phone book.
  Reply
#11
I was talking to Turbo Omni who said he might ask him....
2020 Ford Raptor
2009 Z06
1986.5 Porsche 928S
  Reply
#12
I'll call him tonight for ya! What exactly is it again?
Jeff Morrison - Used Car Manager
Woodstock Garage, Inc.
Chrysler - Dodge - Jeep - RAM

Current Stable of Mopar Junk
57 Chrysler Windsor 4drHT - 67 Dodge D100 Short Bed Step Side - 71 Dodge Challenger - 91 Chrysler Lebaron LX 33k mile Survivor - 91 Dodge Dakota V8 - 05 Chrysler Crossfire Roadster - 08 Ram 2500 Cummins
  Reply
#13
woah old thread but I need this taken care of, an 02 housing for a 2g Eclipse turbo...
2020 Ford Raptor
2009 Z06
1986.5 Porsche 928S
  Reply


Forum Jump: