Garage Pics
#1
I realized that I never put up an pics of the garage, well here they are.

Before
[Image: IMG_5152.jpg]

[Image: IMG_5153.jpg]

After
[Image: IMG_5929.jpg]

[Image: IMG_5933.jpg]

[Image: IMG_5928.jpg]

[Image: IMG_5924.jpg]

Air compressor is in a little out building to the right of the last picture, electricity and air lines are burried. Air feed is on the left hand side of the lift (basically in the middle of the garage).

Racks are Gorilla brand from Sams Club (good stuff).

that's all,
--chad
  Reply
#2
kickass, you've got to enjoy a place you spend some much time in!
1996 BMW 328is white │ 89 BMW 325i track car │84 BMW 325e for sale!│Past: 94 Honda Del Sol S, 2003 Toyota 4Runner V8 Limited, 1996 BMW 328i

e30/e36 parts for sale... PM me
  Reply
#3
Christina said something about the lift at the house, my jaw about dropped..

and it made me wonder if you need a new best friend Smile
  Reply
#4
he doesn't much like us honda folk ;-)
I Am Mike
4 wheels:  '01 RAV4 (Formerly '93 Civic CX, '01 S2000, '10 GTI, '09 A4 Avant)
2 wheels: '12 Surly Cross-Check Custom | '14 Trek Madone 2.1 105 | '17 Norco Threshold SL Force 1 | '17 Norco Revolver 9.2 FS | '18 BMC Roadmachine 02 Two | '19 Norco Search XR Steel (Formerly '97 Honda VFR750F, '05 Giant TCR 2, '15 WeThePeople Atlas 24, '10 Scott Scale 29er XT, '11 Cervelo R3 Rival, '12 Ridley X-Fire Red)

No longer onyachin.
  Reply
#5
MichaelJComputer Wrote:he doesn't much like us honda folk ;-)


lol as luck would have it, I bought the lift used from a honda dealership Smile

Figured it was perfect, didn't get much use lifting those tiny cars!

--chad
  Reply
#6
lol
I Am Mike
4 wheels:  '01 RAV4 (Formerly '93 Civic CX, '01 S2000, '10 GTI, '09 A4 Avant)
2 wheels: '12 Surly Cross-Check Custom | '14 Trek Madone 2.1 105 | '17 Norco Threshold SL Force 1 | '17 Norco Revolver 9.2 FS | '18 BMC Roadmachine 02 Two | '19 Norco Search XR Steel (Formerly '97 Honda VFR750F, '05 Giant TCR 2, '15 WeThePeople Atlas 24, '10 Scott Scale 29er XT, '11 Cervelo R3 Rival, '12 Ridley X-Fire Red)

No longer onyachin.
  Reply
#7
sweet setup Chad. Bet working on that domestic pile is actually easy with that thing :-)
  Reply
#8
Dave Wrote:sweet setup Chad. Bet working on that domestic pile is actually easy with that thing :-)

i dunno, when chad had his rear wheel off this past weekend i got a good look at his rear suspension... bars and shit everywhere... it was scary.
I Am Mike
4 wheels:  '01 RAV4 (Formerly '93 Civic CX, '01 S2000, '10 GTI, '09 A4 Avant)
2 wheels: '12 Surly Cross-Check Custom | '14 Trek Madone 2.1 105 | '17 Norco Threshold SL Force 1 | '17 Norco Revolver 9.2 FS | '18 BMC Roadmachine 02 Two | '19 Norco Search XR Steel (Formerly '97 Honda VFR750F, '05 Giant TCR 2, '15 WeThePeople Atlas 24, '10 Scott Scale 29er XT, '11 Cervelo R3 Rival, '12 Ridley X-Fire Red)

No longer onyachin.
  Reply
#9
MichaelJComputer Wrote:
Dave Wrote:sweet setup Chad. Bet working on that domestic pile is actually easy with that thing :-)

i dunno, when chad had his rear wheel off this past weekend i got a good look at his rear suspension... bars and shit everywhere... it was scary.


haha, I have have one of the 'simpler' rear suspensions for a mustang Smile

yes, having the lift makes working on the pile actually 'fun' well sometimes. Last night I was about to melt a 10lb piece of metal into a tight little ball, I'll post more on that probably this weekend...

--chad
  Reply
#10
white_2kgt Wrote:
MichaelJComputer Wrote:
Dave Wrote:sweet setup Chad. Bet working on that domestic pile is actually easy with that thing :-)

i dunno, when chad had his rear wheel off this past weekend i got a good look at his rear suspension... bars and shit everywhere... it was scary.


haha, I have have one of the 'simpler' rear suspensions for a mustang Smile

yes, having the lift makes working on the pile actually 'fun' well sometimes. Last night I was about to melt a 10lb piece of metal into a tight little ball, I'll post more on that probably this weekend...

--chad

I'm curious (as are a lot of folks I think) about how much you paid for the lift, and how you went about getting it from a Honda dealership (ie - they probably didn't have the lift sitting out by the road with a "For Sale" sign on it...) PM me if you'd rather not say anything about $$$ in the public forum...
My two feet.
  Reply
#11
mongooze Wrote:
white_2kgt Wrote:
MichaelJComputer Wrote:
Dave Wrote:sweet setup Chad. Bet working on that domestic pile is actually easy with that thing :-)

i dunno, when chad had his rear wheel off this past weekend i got a good look at his rear suspension... bars and shit everywhere... it was scary.


haha, I have have one of the 'simpler' rear suspensions for a mustang Smile

yes, having the lift makes working on the pile actually 'fun' well sometimes. Last night I was about to melt a 10lb piece of metal into a tight little ball, I'll post more on that probably this weekend...

--chad

I'm curious (as are a lot of folks I think) about how much you paid for the lift, and how you went about getting it from a Honda dealership (ie - they probably didn't have the lift sitting out by the road with a "For Sale" sign on it...) PM me if you'd rather not say anything about $$$ in the public forum...

pfsha. I don't care. I paied almost $2000 installed. The lift was around 1500 then around 400 for delivery and install. No, it wasn't just laying on the side of the road w/ a for sale sign on it Smile. I purchased it from <!-- m --><a class="postlink" href="http://www.bandrassociates.com/">http://www.bandrassociates.com/</a><!-- m --> They are a company in Gaithersbug, MD that specializes in garage's. Insustry mostly, but they will do a home garage, $$$ though. Basically the Honda dealer in NOVA was moving to a bigger shop and they were getting all new lifts. So B&R comes in, buys the olds ones from them, sells them new lifts and in turn sells the used lifts to car freaks like ourselves and shops that are just getting off the ground. Lead time was about 4 months, but that worked out great for me b/c I paid 1/2 the cost of the lift, the day we closed on the house, the previous owners had a rent back for a few months, then by the time we were ready to move in they had my lift ready to go and I paid for the rest of it on delivery.

Probably the easiest $2,000 I have ever spent. 2 mexicans came with it on the back of a pickup, unloaded it and had it installed in under 3 hrs.

--chad
  Reply
#12
<!-- m --><a class="postlink" href="http://www.bandrassociates.com/">http://www.bandrassociates.com/</a><!-- m -->


...adding to favorites for future reference...
1996 BMW 328is white │ 89 BMW 325i track car │84 BMW 325e for sale!│Past: 94 Honda Del Sol S, 2003 Toyota 4Runner V8 Limited, 1996 BMW 328i

e30/e36 parts for sale... PM me
  Reply


Forum Jump: