+- Madison Motorsports (https://forum.mmsports.org)
+-- Forum: Technical (https://forum.mmsports.org/forumdisplay.php?fid=4)
+--- Forum: Technical Discussion (https://forum.mmsports.org/forumdisplay.php?fid=11)
+--- Thread: Bedding in Pads (/showthread.php?tid=867)
Bedding in Pads - Chris - 08-26-2004
Some general info that we can all use:
<!-- m --><a class="postlink" href="http://www.carbotecheng.com/faq-pad-q3.htm">http://www.carbotecheng.com/faq-pad-q3.htm</a><!-- m -->
- bluhayz - 08-26-2004
quite interesting
- white_2kgt - 08-26-2004
yup, you get that on a nice little piece of white paper when you buy carbotech pads.
http://www.2kgt.com/images/VIRHPDE_2004-07-31/IMG_5712.jpg
-c
- white_2kgt - 09-15-2004
New article from stoptech
<!-- m --><a class="postlink" href="http://www.stoptech.com/whitepapers/bedincontents.htm">http://www.stoptech.com/whitepapers/bedincontents.htm</a><!-- m -->
-c
- ButtDyno - 11-12-2004
Fer the record, the Bobcats just recommend Step 1 of those instructions, or something very similar, followed by a half hour cool down. I dunno why they STILL don't have that on their site. Probably because their site sucks.
john
- Mike - 11-12-2004
lets not get started on their site...
- white_2kgt - 11-12-2004
MichaelJComputer Wrote:lets not get started on their site...
no kidding, dropping in 50 of the SAME control from Front Page 98 is NOT how you design a website.
--chad
Re: Bedding in Pads - Kaan - 04-03-2013
All the links are dead so i went and got the new stoptech link:
<!-- m --><a class="postlink" href="http://www.stoptech.com/technical-support/technical-white-papers/bed-in-theory-definitions-and-procedures">http://www.stoptech.com/technical-suppo ... procedures</a><!-- m -->
Re: Bedding in Pads - rherold9 - 05-03-2016
Kaan Wrote:All the links are dead so i went and got the new stoptech link:
<!-- m --><a class="postlink" href="http://www.stoptech.com/technical-support/technical-white-papers/bed-in-theory-definitions-and-procedures">http://www.stoptech.com/technical-suppo ... procedures</a><!-- m -->
This is what I've done with my Stoptechs bed in awhile back. With medium pedal force 40-10 5-6 times. Then with hard pedal force 80-0 5-6 times. Worked for me. Didn't read any instructions just did it. Basically any harder stops several times will be fine from what I understand? I feel like bedding twice is a bit ridiculous like Stoptech says on their race pads. Even Hawk DTCs only require one bed in just remember to cover any ducts.
Hawk: <!-- m --><a class="postlink" href="http://www.hawkperformance.com/sites/default/files/downloads/Motorsports_Bedding.pdf">http://www.hawkperformance.com/sites/de ... edding.pdf</a><!-- m -->