+- Madison Motorsports (https://forum.mmsports.org)
+-- Forum: Madison Motorsports (https://forum.mmsports.org/forumdisplay.php?fid=3)
+--- Forum: For Sale/Trade, WTB (https://forum.mmsports.org/forumdisplay.php?fid=9)
+--- Thread: thinking of saying bye bye to the hatchcrap.. (/showthread.php?tid=778)
Pages:
1
2
thinking of saying bye bye to the hatchcrap.. - navin - 08-02-2004
![[Image: navin_wallpaper.jpg]](http://www.twilightriot.com/twilight/navin/navin_wallpaper.jpg)
$6,500 OBO
some stuff I left out of that, trades welcome for a mainly stock, GOOD condition hatch...
- Mike - 08-02-2004
part it out.
- navin - 08-02-2004
can't be a roller, dont have stock brakes, suspension assembly..
doubt anyone wants the shell... IMO is a good deal.. buy it and part it out yourself.
-------------------------------
Hey guys the time has come, and I have decided I want to move onto better things in my life and that is why I am trying to sell my pride and joy for the past 3 years. I have loved this car, and it has brought me nothing but a smile to my face. It will be hard letting go of her, but I think it is the right decision..
Anyways here's the good stuff
Engine
1999 USDM B18C1 [GSR] motor
~220 miles on motor since rebuild
JDM ITR .25 OS Pistons
Re-conditioned GSR Rods
All new Bearings, Gaskets, Seals
Bottom end Rebuilt by SGT Racing [Steve Sakai]
All new Valve seals
Brand new OEM Upper Gasket Set
Head Resurfaced and Bead Blasted
JDM 4-1 DC Header [Stainless Steel]
2.5├éÔÇØ Hi-flow Catalytic Converter
2.5├éÔÇØ Mandrel Bent Exhaust Piping
Magnaflow Oval Muffler
B&M Fuel Pressure Regulator and Gauge
Spare GSR Distributor
Toda Lightweight Flywheel
Exedy Clutch [~20k miles]
Full Size Integra Radiator
NO Air Condition or Power Steering
Brakes and Rollers
CTR 5-Lug Brakes
Front ├éÔÇô 11.2 inch brakes
Rear ├éÔÇô 10.1 inch brakes
Mazda 929 Wheels [mesh style]
205/50/15 Falken Azenis Sport Tires
Goodridge Stainless Steel Lines
ITR 1├éÔÇØ Master Cylinder
ATE Superblue Fluid
Suspension
GAB Revostroke Coilovers
Custom rate Eibach Springs [F550/R450]
Integra GSR Front Control Arms, Endlinks
24mm Front GSR Sway Bar
ITR Rear Control Arms
22mm Rear ITR Sway Bar + Beaks Reinforcement Kit
Interior
Red Stripe Del Sol Seats + Civic Rails
OEM ITR Integra Carpet [black]
TRUST Shift Knob
Alpine CD Player
Exterior
Replica Spoon Mirrors
Vision Smoked Corners
Minimal Rust of Rear 1/4 Panels
Passenger Side 1/4 Panel creased near Taillight
Broken Passenger Side Taillight [Outer]
Dent on the Tailgate
Paint on Hood is coming off
Front/Rear Bumpers and Fenders have dents, scratches
Problems with the car
Cold start problem ├éÔÇô car will not idle unless the car is warmed up on cold start. You need to give it gas on start up to let it warm up and after that it idles
Fast Idle ├éÔÇô After warmed up the car will idle from 900-1100ish RPM
These are not major problems that are harmful to the motor, but I don├éÔÇÖt have the money to fix these problems because I do not have any money left from the rebuild to fix it. This is a wicked fast car, very torque down low and the revs are very fast. Plus its basically like having a brand new motor, and everyone knows Steve Sakai is one of the best engine builders on the East Coast.
Suspension feels very good, stiff but not too stiff. It will not give you back pains like some JDM suspensions with crazy spring rates. The car rotates very nicely right now.
If you have any questions please free to contact me
AIM ├éÔÇô b18c1 eh2
Or
Email ├éÔÇô <!-- e --><a href="mailto:ndhas@gmu.edu">ndhas@gmu.edu</a><!-- e -->
---------------------------------------------------------
Even better stuff - PICTURES!!! I will post new pictures of the car shortly, del sol seats, 5-lug on the car, 929 wheels, and some of the body damage...
- .RJ - 08-02-2004
Sell me j00r header
- Sijray21 - 08-02-2004
MichaelJComputer Wrote:part it out.
that's mike talk for "he wants some of your parts", lol
- navin - 08-02-2004
vultures!
- Mike - 08-02-2004
trade your parts for my parts + money...
- navin - 08-02-2004
no garage to do work in....
- .RJ - 08-02-2004
Swapping parts is easy, dont need garage
- navin - 08-02-2004
not swapping out a motor, suspension, etc...
- Mike - 08-02-2004
navin Wrote:no garage to do work in....
yes i do
- navin - 08-02-2004
and no daily driver!
- .RJ - 08-02-2004
Dont need one to swap out parts, donkey.
We actually know what we're doing
- navin - 08-02-2004
....
some donkey from CT is talkin to me about it, i doubt he'll follow through..
christ..
- .RJ - 08-02-2004
navin Wrote:some donkey is talkin to me about it, i doubt he'll follow through..
You're going to get a lot of that.
- navin - 08-02-2004
yaaaawp...
wish i made this decision sooner to sell...
- Mike - 08-02-2004
navin Wrote:and no daily driver!
who said the car would be down for a day?
i don't want the motor...
- 83Rabbit - 08-02-2004
joo consider trade for g60turbo with new engine/tranny/turbo/tons of other parts? :oops: :wink:
- navin - 08-03-2004
nah
- JackoliciousLegs - 08-03-2004
90 RX7 turbo II black, 40k on mazda reman. full exhaust, apexi intake, low boost mod, ported wastegate, fuel cut defenser ... trade
PS... entirely hypothetical of course